Name Of Parts And Introduction Of The Temperature Control Panel - Siemens Refrigerator-freezer Operating Instructions Manual

GB
2.1

Name of parts and introduction of the temperature control panel

The indicator will display the current temperature
setting when the button is pressed. When the
button is pressed continuously, the temperature
will drop 1°C per time. If it is kept being pressed on,
the temperature will drop 1°C per time till -26°C,
then turn back to -18°C and drop again.
When the button is released for 5 seconds, the
indicator will display the current instantaneous
temperature of the freezer and the latest setting of
freezer temperature will be saved.
This saved value will not be erased even in the case
of power-cut and requires no resetting when power
is restored.
Minus indicator (3)
The green indicator will indicate "-" , means below
zero.
Screen (4)
It displays the temperature in the cooler or freezer
and blinks for alarm.
Button for alarm ( ) (5)
)
When the temperature of the freezer is above or
equals to the alarm temperature which is -11°C
( -5°C in the case of "super " mode), the refrigerator
will be in alarm mode. The indicator will flash,
displays alarm signal. The temperature displayed at
this point is the highest temperature that has been
reached in the freezer. At the same time the alarm
will ring. If the button for alarm 5 is pressed, then
the alarm will be switched off. Figure
8
Button for memory (6)
If power cut occurs while the user is long
away from home, the memory will automatically
register the highest temperature that has been
reached in the freezer (it has to be above -11°C,
above -5°C in the case of "super" mode) and will
keep flashing when power is restored to remind the
user there was a power cut. Press memory button
6. The indicator will display in flashing the current
instantaneous temperature and the highest
temperature which was saved would be cleared.
When the temperature of the freezer is below
-17°C, the indicator will stop flashing and restore its
regular state.
Button of quick freezing (7)
This refrigerator has the function of quick freezing.
When the "super" button is pressed, the indicating
light for quick freezing goes on and the refrigerator
starts operating in quick freezing mode.
If this button is pressed again, the quick freezing
operation is then cancelled and the refrigerator will
restore its previous state of operation.
Otherwise the "super" mode will be automatically
cancelled in 51 hours and the refrigerator will
restore its regular mode.
Note: Cooler keeps previous set temperature in
quick freezing mode. The damper thermostate
should be set to a low position( e.g.
position
cooler would be too low.
3
Indicator for quick freezing (8)
When the red light is on, the refrigerator is in quick
freezing mode. The light goes on only when the
"super" button is pressed, otherwise the light
would remain off.
Page 8
) otherwise the temperature in
2006.7.18, 6:14 PM