Siemens Refrigerator-freezer Operating Instructions Manual page 6

GB
1.3
Installation, placement and altering the direction that the door opens
Altering the direction that the door
opens
Figure 5
The direction that the cooler and freezer doors
open may need to be altered due to the layout
of the room that the refrigerator is located in. To
alter the door from opening from the left side to
opening from the right side:
1 Remove the screw and then remove the right
lower supporting plate (1) and the freezer door(2).
Remove the screw and then remove the left
supporting plate (3).
3 Remove the screw and then remove the middle
supporting plate (4) and the cooler door (5). Then
fix the right lower supporting plate back onto the
right of the refrigerator (6).
4 Remove the left plastic cover from upper cool
door, and keep it as spare part (7), move the right
plastic cover from the right side of the cool door
to left-side (8), then put the right plastic cover
into the right hole (9).
5 Take down the four plastic covers on bottom
edge of cooler door and top edge of freezer door
and crisscross lay them in the corresponding
holes (10). (e.g. Put the plastic cover on left
bottom edge of cooler door into the hole on right
6
top edge of freezer door, then put the plastic
cover on right top edge of freezer door into the
hole on left bottom edge of cooler door.)
6 Remove the plastic plugs from the middle left of
the refrigerator and then insert them into the
holes on the middle right of the refrigerator (11).
7 Remove the upper axes bolt from the upper right
side of the refrigerator and then screw it tightly
into position on the upper left side (12).
8 Insert the upper axes bolt into the hole on the
top left of the cooler door and then shut the
cooler door (13). Insert the middle supporting
plate into the bottom left cooler door bolt hole
and then fix it firmly onto the refrigerator with two
screws (14).
9 Insert the bolt of the middle supporting plate
into the top left hole of the freezer door and then
close the freezer door (15). remove the axes bolt
from right lower supporting plate and screw it
tightly into the left lower supporting plate. then
insert the bolt of left lower supporting plate into
the bottom left hole of freezer door and then fix
left lower supporting plate firmly onto the
refrigerator with two screws (16).
Page 6 2006.7.18, 6:14 PM
5