Table of Contents
Advertisement
Drive specification
Sustainable 4KB Random IOPs for 5 year Endurance
(65%/35% R/W 70% Duty Cycle)
Startup current (typical) 12V / 5V (peak)
Voltage tolerance (including noise)
Case temperature
Temperature gradient (°C per hour max)
Relative humidity
Relative humidity gradient
Wet bulb temperature (°C max)
Altitude, operating
Altitude, nonoperating
(below mean sea level, max)
Operational Shock (max at 0.5ms)
Non-Operational Shock (max at 0.5ms)
Vibration, random operating
Vibration, random nonoperating
Nonrecoverable read errors, max
Annualized Failure Rate (AFR)
Warranty
Lifetime Power cycles
Supports Hotplug operation per
Serial ATA Revision 2.6 specification
*One GB equals one billion bytes when referring to drive capacity. Accessible capacity may vary depending on operating environment and
formatting.
6
ST400FM0012
ST200FM0012
23,000
0.34 / 0.47 amps
12V ± 5% / 5V ± 5%
0° to 60°C (operating)
–40° to 70°C (nonoperating)
20°C (operating)
20°C (nonoperating)
5% to 95% (operating)
5% to 95% (nonoperating)
20% per hour max
28
–60.96 m to 3048 m
(–200 ft. to 10,000+ ft.)
–60.96 m to 12,192 m
(–200 ft to 40,000+ ft)
1000 Gs
1000 Gs
20–2000 Hz: 11.08 Grms
20–2000 Hz: 11.08 Grms
16
1 LBA per 10
bits read
0.44%
To determine the warranty for a specific drive, use a web browser to
access the following web page:
support.seagate.com/customer/warranty_validation.jsp
You will be asked to provide the drive serial number, model number (or
part number) and country of purchase. After submitting this information,
the system will display the warranty information for your drive.
50,000
Yes
ST100FM0012
22,000
Pulsar.2 Product Manual, Rev. A
Advertisement
Table of Contents
