3. Remove the pre-filter from the rear cover. Clean the pre-filter with the vacuum
brush attachment of your vacuum cleaner. This will remove lint and dirt from the
filter. Use a clean, damp, soft cloth to wipe the pre-filter again.
NOTE: Clean the pre-filter often if possible.
4. After cleaning, reattach the pre-filter to the rear cover, and install the rear
cover back to unit and securely latch in place.
CLEANING HEPA FILTER (See Air Cleaning System)
1. Turn off and unplug the unit;
2. Press the Lock & Release Button and remove the Rear Cover from the unit;
NOTE: The unit will shut off after the rear cover is removed.
- 6 -