Kogan Kapuriohepa User Manual page 6

4. Pressing Fan Speed Button (
Medium fan speed (
5. Pressing Fan Speed Button (
1).
speed (
6. Pressing Fan Speed Button (
3).
fan speed (
7. To turn the air purifier off, press the On/Off Button ( ).
NEGATIVE ION FUNCTION :
To turn the air purifier on, press the On/Off Button( ),the ionizer also works,during the
air purifier working time,the ionizer is always working.
UV LAMP FUNCTION
The UV-C germicidal lamp can kill harmful airborne bacteria and virus. This function
will work in any mode. Press the UV Button (
UV lamp by pressing the UV Button (
UV LAMP RESET FUNCTION
If the UV lamp needs to be replaced, the UV icon on the LCD will illuminate and
flicker. After replacing the UV lamp, reset the UV lamp by pressing the UV Button
( ) for a few seconds, the UV icon will stop flickering and the new UV lamp will start
to work. Check from the UV view window (Unit Front View in page 2), if the UV lamp
still lights, it should not be replaced.
HEPA RESET FUNCTION
If the HEPA filter needs to be cleaned, HEPA Reset icon on LCD will illuminate and
flicker. After cleaning the HEPA filter, RESET the HEPA filter by using a pin or needle
to press the HEPA RESET Button (
instructions on how to clean the HEPA filter see the CLEANING HEPA FILTER on
page 6.
) at this point will set the air purifier into
2).
) again will set the air purifier into Low fan
) once more will set the air purifier back to High
:
:
:
), then the icon will stop flickering. For
- 4 -
) to start the UV lamp and stop the
) again.