Removing the back panels from your T541 flat panel monitor
Removing the back panels will allow access to the power connector on the
T541 flat panel monitor for attachment of the power cord.
1. Turn off your monitor and unplug the ac/dc power supply from the power
outlet.
2. Press both sides of the back panel 1 and push it outward from the
monitor to remove it completely. Push panel 2 upward to remove.
3. Push the remaining panel outward from the monitor to remove.
4. To replace the back panels, reverse the steps, after bezel speaker cabling has
been routed and attached (see step 7 on page 1-5).
Installation and user's guide
1-3