Preparation - Kenwood TK-2360 Instruction Manual

INSTAllING/ rEMOvING THE (OPTIONAl) BATTEry PACK
1 match the guides of the
battery pack with the grooves
on the upper rear of the
transceiver, then firmly press
the battery pack in place .
2 lock the safety catch to
prevent accidentally releasing
the battery pack .
3 to remove the battery pack,
lift the safety catch, press the
release latch, then pull the
battery pack away from the
transceiver .
Note:
◆ For battery pack charging procedures and useage, refer to the
battery charger instruction manual .
◆ before charging a battery pack that is attached to the
transceiver, ensure that the safety catch is firmly closed.
INSTAllING/ rEMOvING AlKAlINE BATTErIES
◆ Do not install batteries in a hazardous environment where
sparks could cause an explosion .
◆ Never discard batteries in fire; extremely high temperatures can
cause batteries to explode .
◆ do not short circuit the battery case terminals .
◆ do not use rechargeable batteries .
2

PrEPArATION

2
1
3