Kenwood TK-2360 Instruction Manual page 23

SElCAll (SElECTIvE CAllING)
a selcall is a voice call to a station or group of stations .
n Transmitting
1 select your desired Fleetsync channel .
• your dealer can program different id codes on different
channels .
2 press the PTT switch and begin your conversation.
n receiving
If enabled by your dealer, an alert tone will sound and the
LED will blink when a Selcall has been received.
to respond to the call, press the PTT switch and speak into
the microphone .
n Identification Codes
an id code is a combination of a 3-digit Fleet number and a
4-digit ID number. Each transceiver has its own ID.
PAGING CAll
1 select your desired Fleetsync channel .
2 press the key programmed as Paging to transmit your ptt
list id, to request a call .
STATUS MESSAGE
you can transmit pre-programmed status messages by
pressing the keys programmed as Status 1 or Status 2 .
status messages are 2-digit codes ranging from 0 to 
(80 ~  are reserved for special messages) .
5