Ryobi ECO2437 Owner's Operation Manual page 8

RULES FOR SAFE OPERATION
■ STAY ALERT AND EXERCISE CONTROL. Watch what
you are doing and use common sense. Do not operate
tool when you are tired. Do not rush.
■ SAVE THESE INSTRUCTIONS. Refer to them frequently
and use them to instruct other users. If you loan someone
this tool, loan them these instructions also.
PRODUCT SPECIFICATIONS
Wheel Type
Wheel Diameter
Bore Diameter
No Load Speed
Rating
Input
Net Weight
Fence Angle
Right
Left
Vice Clamp-Angle
Right or Left
Maximum Cutting Capacities:
Shape
OA
Angle
o
0 115 mm 119 mm
(4-1/2") (4-23/32")
o
45 115 mm 106 mm
(4-1/2") (4-3/16")
WARNING:
This cut-off machine has been designed for cutting metals,
using reinforced abrasive cut-off wheels only. Do not remove
the wheel, install a steel blade, and attempt to cut other types
of materials such as wood, masonry, etc.
Attempting to cut these other types of materials could cause
an accident resulting in possible serious personal injury.
WARNING:
Do not attempt to modify this tool or create accessories
not recommended for use with this tool. Any such alteration
or modification is misuse and could result in a harzardous
condition leading to possible serious personal injury.
Reinforced Abrasive Wheels
355 mm (14")
25.4mm(1")
3900+/-10% min-1
240 V ~ 50 Hz
A
B
115 mm x 130 mm
(4-1/2" x 5-3/32" )
102 mm x 194 mm
(4" x 7-5/8" )
70 mm x 233 mm
(2-3/4" x 9-5/32" )
115mmx103mm
(4-1/2" x 4" )
ENGLISH
DESCRIPTION (Fig 1&2&3)
1 Lower Guard
2 Abrasive Wheel
3 Fence Quick Lock
4 Adjustable Fence
5 Lock Lever
6 Vice Screw
7 Vice Crank Handle
8 Machine Base
9 Vice Clamp
10 Wrench
11 Depth Stop Bolt
12 Spindle Lock Button
13 Motor
14 Machine Arm
15 Switch Trigger
16 Upper Guard
2400 W
17 Lock Hook
17.5 Kg
45°
FEATURES
45°
45°
MOTOR
This machine has a strong motor with sufficient power to
handle tough cutting jobs. It also has externally accessible
A
brushes for ease of servicing.
POWER CORD
137mm
The power cord is H07RN-F type with length 1.8 earthing.
(5-3/8")
ABRASIVE WHEEL
A 355mm abrasive wheel is included with your cutoff
machine. It may cut materials up to 115mm thick or
233mm wide, depending upon the thickness or width of
100mm
the material and the angle setting at which the cut is being
(3-15/16")
made.
SELF-RETRACTING LOWER WHEEL GUARD
The lower wheel guard provides protection from each side
of the wheel. It retracts over the upper wheel guard as the
wheel is lowered into the workpiece.
VICE CLAMP
A vice clamp has been provided with your cut-off machine.
It is located on the end of the vice screw and provides
greater control by clamping the workpiece to the fence.
It also prevents the workpiece from creeping toward the
wheel during a cutting operation.
3
18 Protection Guard
19 Carry Handle
20 Rubber Foot
21 Fence Bolt
22 Chain
23 Live Tool Indicator
24 Wheel Arbor
25 Inner Washer
26 Inner Flangle
27 Spacer
28 Outer Flange
29 Outer Washer
30 Wheel Bolt
31 Scale Indicator
32 Fence Scale
33 Brush Assemblies
34 Brush Cap