Troubleshooting - Bissell SPOTLIFTER Powerbrush 1716 Series User Manual

Troubleshooting

problem possible causes
Power cord not plugged in
cleaner
blown fuse/tripped breaker
won't run
C.i.D. needs to be reset
spray nozzle clogged
Reduced
spray or
solution tank empty
no spray
Tank not inserted properly
Deep cleaner
Collection tank is full
won't pick
Collection tank drain plug is loose
up cleaning
solution
Dual
Removable cartridge not inserted
powerbrushes properly/all the way
are not
broken belt
rotating
Tank is past full line
Water coming
Unit may be tipped upright
out of vents
causing dirty water to leak from
collection tank
please do
not return
this product
to the store.
Other maintenance or service not included in the manual should
be performed by an authorized service representative.
Thank you for selecting a bissell product.
for any questions or concerns, bISSEll is happy to
be of service. contact us directly at 1-800-237-7691.
WaRnInG
To reduce the risk of electric shock, turn power switch
off and disconnect plug from electrical outlet before
performing maintenance or troubleshooting checks.
Remedies
Check electrical plug
Check/replace fuse or reset breaker
Reset C.i.D. (page 5)
Clean spray nozzle
Check/refill tank
Make sure tank is inserted properly
empty collection tank
Check plug for snug fit
Make sure to firmly "snap" the brush
cartridge in place
Replace belt (page 8)
empty tank
empty collection tank
www.bissell.com 800.237.7691
9