Harman Kardon HA160-0004-A Owner's Manual page 9

Quick Start Connection and Setup
Connect 75-ohm Connect to coaxial
FM antenna here digital audio output
of A/V sources, DVD,
HDTV, CD, etc.
Connect AM loop
antenna here
FM AM
®
NRTL /C
LR110480
CSA E65
ANTENNA
FRONT CENTER SURR 1 2 3
L
R
SUB
6-CH DIRECT INPUTS ANALOG AUDIO INPUTS
Connect to analog audio
output of A/V sources,
CD, tuner, etc.
1. Before proceeding, make certain that all equipment, including the 2.0, is unplugged from AC power. This will prevent
any damage due to the unintended activation of automatic turn-on circuits.
2. Use high-quality audio and video interconnect cables to connect your source equipment to the rear of the 2.0 as shown
in the diagram above and the table below. It is important to note that unlike conventional audio/video equipment, the 2.0
does not have inputs that are labeled for connection to a specific type of equipment (e.g., inputs labeled "CD," "Tape" or
"VCR"). Instead, the 2.0 allows you to connect the analog or digital audio and composite or S-Video outputs of your source
equipment to any of the inputs. Then, using the setup procedures detailed on page 28 of this manual, you can custom
configure the input sources. However, for a quick starting point, follow the input suggestions outlined in the chart shown
below. They conform to the preset conditions for the 2.0.
Source
Equipment
Cable Box, Satellite
Receiver, TV Tuner
VCR
DVD
HDTV, Satellite with Digital
Audio, Laser Disc
Tuner (internal)
CD Player
Cassette or Tape Deck
Outboard Decoder
Signature 2.0
Connect to output
of composite
video sources
Connect to optical
digital audio output
of A/V sources, DVD,
HDTV, CD, etc.
1 2 3 4 5 6
DIGITAL AUDIO DATA INPUTS
4 5 6 FRONT CENTER SURR
L
R
SUB
AUDIO OUTPUTS
REC OUTPUTS
Connect to audio
Connect to
input of VCR or
a powered
audio recorders
subwoofer
or subwoofer
amplifier
Remote
Button
TV
Video 1
Video 2
Video 3
Tuner
CD
Tape
Aux
5
Connect to Connect to
S-Video input
composite
of main monitor
video input
of VCRs
Connect to Connect to
S-Video
composite
video input of output
main monitor sources
IN OUT
IN OUT
1
MAIN
1 2 3
MAIN
4 5 6 2
REC REC
COMPOSITE VIDEO
S – VIDEO
RS-232
IR IR TRIGGER
IN OUT OUTPUT
EXTERNAL CONTROLS
Connect to Connect to "Trigger
inputs of audio In" jack on Signature
power amplifiers Series or other compatible
power amplifier
Video Input
Connection
Analog 2
Analog 1
Digital 1
Digital 2
(Internal Tuner)
Digital 3
Analog 5
6-Ch. Direct Inputs
Connect AC Power
to non-switched
wall outlet
Connect to
S-Video input
of VCRs
MODEL NO.: SIGNATURE SERIES 2.0
HARMAN KARDON
NORTHRIDGE
CALIFORNIA, USA
MADE IN USA
~
115V 60Hz
75 WATTS
SERIAL NUMBER
CA UTI ON CA UTI ON
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AVIS:
RISQUE DE CHOC ELECTRIQUE - NE PAS OUVRIR
WARNING:
TO REDUCE THE RISK OF FIRE
OR ELECTRIC SHOCK DO NOT EXPOSE THIS
EQUIPMENT TO RAIN OR MOISTURE.
Manufactured under license from Dolby Laboratories Licensing
Corporation. "Dolby", "AC-3", "Pro Logic" and the Double-D symbol
are trademarks of Dolby Laboratories Licensing Corporation.
Copyright 1992 Dolby Laboratories, Inc. All rights reserved.
Audio Input
Connection
Composite 2
Composite 1
S-Video 1
S-Video 2
Composite 2
N/A
N/A
Composite 1