Front Panel Controls - Harman Kardon HA160-0004-A Owner's Manual

Front Panel Controls

2.0
Standby
On/Off
1 2
1 Master Power Switch
2 Standby Switch
3 Source Selectors
4 Surround Selectors
1 Master Power Switch: This is the main power
control for the 2.0. To turn the unit on, press this switch
in until it latches and is flush with the front panel. To
turn the unit off press in briefly, and the switch will
unlatch and pop out. Once this switch is in the "ON"
position you may leave it there and use the remote
control or standby switch to turn the 2.0 on or off.
NOTE: Even when the Master Power Switch is in
the "OFF" position, the 2.0 is still connected to the AC
power source.
2 Standby Switch: Press this switch to turn the unit
on from the Standby mode. Press it again to return to
the Standby mode. Note that in order for this switch to
operate the 2.0, the Master Power Switch 1 must
be in the "ON" position, as indicated by the amber
Standby LED 5.
3 Source Selectors: Press these buttons to change
the input source selection. Use them to scroll through the
list of sources you watch and listen to.
Signature 2.0
! )
DVD Vol
Dolb y Di g ital
10
Source Surround Tune
3 4 5 6
5 Standby LED
6 Power Indicator
7 Tune Buttons
8 Mute Button
4 Surround Selectors: Press these buttons to
change the surround mode in use. Note that the list
of modes available is different for digital or analog
audio sources.
5 Standby LED: When this indicator lights in an
amber color, the 2.0 is in the Standby mode, and it is
ready to be turned on or off when either the Standby
Switch 2, or the remote Main On/Off a is pressed.
When the Standby LED is out, but the Power
Indicator 6 is illuminated in blue, the unit is on.
When both of these indicators are dark, the 2.0 is fully
off, indicating that the Master Power Switch 1 is in
the "OFF" position or the 2.0 is not plugged into a live
AC power source.
6 Power Indicator: This indicator is illuminated
in blue when the 2.0 is in full operation. If it is not lit,
and the Standby LED 5 is amber, the unit is in the
Standby mode. When neither indicator is lit, the
2.0 is off, or the unit is not connected to a live AC
power source.
8
9
Mute
7 8
9 Volume Control
) Information Display
! Remote Sensor Window