Harman Kardon HA160-0004-A Owner's Manual page 21

Programmable Keys
Many of the buttons on the remote control may be
user programmed to new functions to operate virtually
any component in your system. Eleven CANNOT be
programmed with a new code, as they control high-level
functions of the 2.0. These keys are Main Power On,
Main Power Off, and the nine source input keys:
TV, Vid 1, Vid 2, Vid 3, Tuner, CD, Tape 1
and Aux.
Programmable keys are divided into two groups. Some
keys may be programmed with a separate function
for each of the inputs. Thus, these keys may change
their code when the input source is changed. (e.g., the
Play key may transmit a different code when CD is
selected as opposed to when VCR is selected.) The
keys that may be programmed with multiple codes are
the following:
All Numeric Keys (0 – 9)
Source Power On
Source Power Off
Stop
Disc/Track
Record
Pause
Channel/Preset Up
Channel/Preset Down
Tune Up
Tune Down
P-Scan
TV Volume Up/Down
Display
Store
RDS
Type
Presets
Signature 2.0
All other keys may only be programmed with one
remote code. The code contained in these keys remains
the same regardless of the source selection.
WARNING: These keys transmit codes that are vital
to the operation of the product. It is not recommended
that they be programmed with alternative codes, as it
may then be impossible to operate certain functions of
the receiver.
Menu
All Navigation Buttons ‹ ›
Enter
All Mode Selectors
Treble
Sub
Center
Bass
Balance
Surr
Mute
Simulcast
17
⁄ ¤