Husqvarna 966004101 Operator And Parts Manual page 9

4
CONTAINER INSTALLATION
1. Install containers on support frame, overlapping
containers at center tube.
Note: One container should always overlap the
other container at the center tube.
2. Close cover and lock latch handle over support
tubes.
WARNING!
DO NOT operate mower unless
container is properly installed.
Container is subject to wear and
deterioration, check containers
frequently, replace when cracked or
damaged. Use only a recommended
replacement container.
ASSEMBLY
5
LOWER CHUTE INSTALLATION
1.
2.
3.
Latch Handle
4.
Support Frame
Raise and hold deflector shield in upright position.
Fit lower chute as shown and hook rear latch to
mower deck.
Align the bracket slot on lower chute with the
deflector bracket tab on the mower deck. Slide
chute down over tab.
With the lower chute in proper position, hold the
chute securely while hooking the front latch to the
mower deck.
NOTE: While hooking the latches, the deflector
shield may try to push the chute away from the
mower deck opening. It is important to hold the
chute in position while hooking the latches to
the mower deck.
Rear Latch
Attach Rear Latch here
Deflector
Shield
Deflector
Bracket Tab
Front Latch
9