Husqvarna 966004101 Operator And Parts Manual page 10

6
UPPER CHUTE INSTALLATION
1. With ¼" drill bit, add a new hole 4¾" inches from
the top of the chute, down along the side seam.
2. Attach bungee latch assembly from kit.
New Bungee
Latch Hole
10
ASSEMBLY
3. Slide upper chute onto lower chute, lining up
notches and channels.
4. Stretch bungee latch up onto acorn nut on upper
chute to secure.
Before continuing to Step 7, locate the seal
fastening kit (packed separately) and install the
top cover grommet.