Sharp HT-DV30H Operation Manual page 56

Timer and sleep operation (Remote Control only) (continued)
HT-DV30H
ENGLISH
11
When the preset time is reached, playback will start.
The volume will increase gradually until it reaches the preset
volume.
12
When the timer end time is reached, the system will enter
the power stand-by mode automatically.
Once timer:
The timer will be cancelled.
The "r" indicator will blink during timer playback.
Daily timer:
The timer will operate at the same time every day. It will
continue until the daily timer setting is cancelled. Cancel the
daily timer when it is not in use.
The "DAILY r" indicator will blink during timer playback.
Note:
When performing timer playback using another unit connected to the
USB terminal/OPTICAL 1/OPTICAL 2/AUX IN/SCART sockets,
select USB or OPTICAL 1 or OPTICAL 2 or AUX or SCART in step 8.
This unit will turn on or enter the power stand-by mode automatically.
However, the connected unit to USB terminal/OPTICAL 1/OPTICAL
2/AUX IN/SCART sockets will not turn on or off.
E-55
Checking the timer setting in the timer stand-by mode:
1 Press the CLOCK/TIMER button.
2 Within 10 seconds, press the
or "DAILY", and press the MEMORY/DIMMER button.
3 Within 10 seconds, press the
CALL" or "DAILY CALL", and press the MEMORY/DIMMER
button.
The unit returns to the timer stand-by mode after displaying the
settings in order.
Cancelling the timer setting in the timer stand-by mode:
1 Press the CLOCK/TIMER button.
2 Within 10 seconds, press the
or "DAILY", and press the MEMORY/DIMMER button.
3 Within 10 seconds, press the
OFF" or "DAILY OFF", and press the MEMORY/DIMMER button.
Timer will be cancelled (the setting will not be cancelled).
Reusing the memorised timer setting:
The timer setting will be memorised once it is entered. To reuse the
same setting, perform the following operations.
1 Turn the power on and press the CLOCK/TIMER button.
2 Within 10 seconds, press the
or "DAILY", and press the MEMORY/DIMMER button.
3 Within 10 seconds, press the
ON" or "DAILY ON", and press the MEMORY/DIMMER button.
4 Press the ON/STAND-BY button to enter the power stand-by
mode.
or button to select "ONCE"
or button to select "ONCE
or button to select "ONCE"
or button to select "ONCE
or button to select "ONCE"
or button to select "ONCE