Listening To The Radio - Sharp CD-XP120H Quick Manual

Listening to a CD (CDs)
1
Press the CD button.
2
Press the 7 7 7 7 7 OPEN/CLOSE button to open the disc tray.
3
Place the CD(s) on the disc tray, label side up.
When loading a third disc, press the DISC SKIP button to turn the
disc tray, then place the CD in the open position.
4
Press the 7 7 7 7 7 OPEN/CLOSE button to close the disc tray.
5
To select the CD you want to listen to first, press one of s s s s s 1 - s s s s s 3
buttons on the remote control.
6
Press the 0 / R 0 / R button to start playback.
0 / R 0 / R 0 / R
CDXP120HE_QG 3

Listening to the radio

1
Press the TUNER (BAND) button repeatedly to select the desired
frequency band (FM or AM).
2
Press the TUNING (X X X X X or W W W W W ) button to tune in to the desired station.
When the TUNING button is pressed for more than 0.5 seconds, scan-
ning will start automatically and the tuner will stop at the first re-
ceivable broadcast station.
12 cm (5") 8 cm (3")
To receive an FM stereo transmission:
Press the TUNER (BAND) button to display the "ST" indicator.
"j" will appear when an FM broadcast is in stereo.
– 3 –
FM stereo mode indicator
FM stereo receiving indicator
02.4.10, 6:34 PM