5. Spark arrester
maintenance
(optional
part)
m
If the engine
has been running,
the muffler
will be very hot.
Allow
it to cool before
proceeding.
1. Remove the three 4 mm screws @ from the exhaust deflector @ , and
remove the deflector.
2. Remove the eight 5 mm screws @ from the muffler protector @ , and
remove the muffler protector.
3. Remove the 4 mm screw @ from the spark arrester @ , and remove the
spark arrester from the muffler 0.
4. Use a brush to remove carbon deposits from the spark arrester screen.
CAUTION:
Be careful
not to damage
the spark arrester
screen.
SCREEN
NOTE: The spark arrester must be free of breaks and holes. Replace, if
necessary.
5. Install
the spark arrester
and the muffler
in the reverse order of
disassembly.
28