Changing The Door Opening Direction - Smeg Refrigerator Instructions For Use Manual

Changing the door opening direction

Tools required: socket wrench / spanner Nr. 8, slot and cross screwdriver
1. Use the slot screwdriver to remove the covers A and B.
2. Undo / remove the hinges (C, E1) and the door (D), starting from the top and working your way
down. Make sure the door is not damaged.
3. Move the covers (H) to the opposite side.
4. Door (D): move the hinges (J) and the cover (M) to the opposite side.
5. Start from the bottom and work your way up: attach and secure the lower hinge (E2) supplied in
a bag; mount the door (D); and fasten the hinge (C); Do not forget to use the washers, placing
them as they were before the door was removed.
6. Attach the covers A and B.
7. Changing the handle position: remove the covers, undo the screws, and attach the handle to
the opposite side. Place the covers on the opposite side. Use the covers supplied in a bag to
cover the slot where the handle was initially attached.
Save the hinge E1 in case you need to change the direction of door opening again at a later time.
8