Changing The Direction Of Opening The Door; Control Panel - Appliance With Electronical Regulation - Smeg FL224APZD Instructions For Use Manual

Changing the Direction of Opening the Door

Freestanding appliance
Tilt the appliance so that the bottom hinge can be unscrewed and proceed with disassembling as
shown in the Figure 3. Then fi x the assembly parts again in the opposite turn. Use the attached
opposite hinge insert piece.
Use the bungs, which have been pulled out, on the opposite side. Check the door seal. In case that
it does not rest well, take it off and turn it by 180°.

Control panel - appliance with electronical regulation

Necessary tools: ring spanner No.8, screwdriver, torque 25
CONTROL UNIT I
7