Sharp CD-MPS600W Operation Manual page 38

CD-MPS600W
CD-MPS700W
Timer and sleep operation (continued)
CD-MPS800W
ENGLISH
4
Within 10 seconds, press the
lect "ONCE SET" or "DAILY SET", and press the MEMORY/
SET button.
5
Press the or
"REC", and press the MEMORY/SET button.
White
The illustrations show the daily timer setting.
6
Press the or
then press the MEMORY/SET button.
The illustrations show the timer playback setting in the daily tim-
er mode.
7
Press the or
then press the MEMORY/SET button.
8
Set the time to finish as in steps 6 and 7 above.
E-36
9
or button to se-
button to select "PLAY" or
Red
10
11
button to adjust the hour and
button to adjust the minutes and
04/2/9
Switch input with the or
press the MEMORY/SET button.
To select the timer playback source: CD, TUNER, TAPE 1 or
TAPE 2.
To select the timer recording source: TUNER.
" When you select the tuner, select a station by pressing the
or button, and then press the MEMORY/SET
button.
" If a station has not been programmed, "NO PRESET" will be
displayed and timer setting will be cancelled.
Adjust the volume using the VOLUME control, and then
press the MEMORY/SET button.
Do not turn the volume up too high.
Press the ON/STAND-BY button to enter the power stand-
by mode.
The "TIMER" indicator lights up and the unit is ready for timer
playback or timer recording.
CD-MPS800W(Z)E4.fm
button, and then
TINSZA063AWZZ