Sharp CD-MPS600W Operation Manual page 31

! Tape 2 playback
1
Press the ON/STAND-BY button to turn the power on.
2
Press the TAPE (1 2) button to select TAPE 2.
3
Open the cassette door by
pushing the area marked
" ".
4
Load a cassette into the
TAPE 2 cassette compart-
ment with side A facing
you.
5
Press the button to choose one side or both
sides.
... To listen to both sides.
To play both sides ( ), start from side A. When playback starts
from side B, side A will not be played.
... For endless repeat play of both sides.
... To listen to one side.
6
Press the / button to listen to side A, or the
for side B.
Reverse play
Forward play
! Various tape functions
Function Main unit
Side A play-
back
Side B play-
back
(TAPE 2
only)
Stop
Fast for-
ward/Fast
rewind
(TAPE 2
only)
button
Caution:
" To remove the cassette, press the
compartment.
" Before changing from one tape operation to another, press the
button.
" If a power failure occurs during tape operation, the tape head will
remain engaged with the tape and the cassette door will not
open. In this case, wait until the power is restored.
04/2/9 CD-MPS800W(Z)E3.fm
CD-MPS600W
CD-MPS700W
CD-MPS800W
ENGLISH
Remote Operation
control
Press in the stop
mode.
Press in the stop
mode.
Press in the playback,
fast forward or fast re-
wind mode.
Press in the playback
or stop mode.
button, and then open the
E-29
TINSZA063AWZZ
4