Sharp CD-MPS600W Operation Manual page 33

! To change the audio mode
Sound of the playback source can be switched among the STE-
REO, L-CH, R-CH, and V-CANCEL (VOCAL CANCEL) modes.
The audio mode function is used when the left and right channels
have individual signals from each other.
Press the KARAOKE MODE button until the desired audio
mode is displayed.
Each time the KARAOKE MODE button is pressed, the mode will
change as follows:
STEREO L-CH R-CH
STEREO Sounds on the left and right channels are played.
L-CH Sounds on the left channel only are played.
R-CH Sounds on the right channel only are played.
V-CANCEL The main vocal is lowered.
Notes:
" The initial audio mode setting is "STEREO".
" The setting will remain unchanged when you change the disc,
you set the unit to the stand-by mode or the function is changed
from the CD to another function.
" When playing a sound multiplexed disc on which a vocal and
music have been separately recorded, select the audio mode as
desired.
! To change general stereo source to karaoke
source
Even ordinary discs and tapes not recorded specifically for karaoke
can be used for karaoke just by toning down the main vocal.
Press the KARAOKE MODE button until "V-CANCEL" appears
in the display.
Notes:
" Use discs recorded in stereo. The function will not work with
mono sources.
" With some discs and tapes the original vocals may still be heard.
Notes on sound multiplexed karaoke discs:
Sound multiplexed karaoke discs are discs on which the main vocal
and the BGM (Background music) have been recorded on one of
the two channels and only the BGM on the other.
" The function will not work properly with discs which do not belong
to this group.
" Discs on which vocal has been recorded on the left channel and
V-CANCEL
music on the right may not play properly.
! Recording of mixed sound to a cassette tape
You can record mixed sound from the microphone and CD, TUNER,
TAPE 1 or GAME.
1 Press the CD, TUNER (BAND), TAPE (1
select the audio source.
" To record mixed sound from TAPE 1, press the TAPE (1
button and select "TAPE 1".
2 Insert a blank tape into the TAPE 2 cassette compartment with
side A facing you.
3 Press the button.
4 Press the /
side B.
! Recording of the microphone signals only to a
cassette tape
1 Press the TAPE (1
play.
2 Insert a blank tape into the TAPE 2 cassette compartment with
side A facing you.
3 Press the button.
4 Press the /
side B.
04/2/9
2) or GAME button to
button to record on side A, or the button for
2) button until "TAPE 2" appears on the dis-
button to record on side A, or the button for
CD-MPS800W(Z)E4.fm
TINSZA063AWZZ
CD-MPS600W
CD-MPS700W
CD-MPS800W
ENGLISH
2)
4
E-31