Sharp CD-C491H Operation Manual page 35

(Continued)
Jog
dial
MENU ITEM
1
2
3
SET UP
You can check (and adjust) the speaker level by listening to
the sound output from each speaker individually, whilst stand-
ing at the actual listening position in the room.
The speaker level can be adjusted using the remote control.
1
MENU
ITEM
2
3
Notes:
34
CD-C491H(SUK) TINSE0229AWZZ
Test tone
Press the MENU button repeatedly to make "TEST
TONE" appear.
Within 10 seconds, press the ITEM button.
The test tone will be heard from each speaker, in order,
at about 5 second intervals.
FRONT LEFT
CENTER
FRONT RIGHT
RSURROUND
LSURROUND
S-WOOFER
When the test tone is being output, the indicator for that
speaker will flash.
The test tone will be heard until the current menu selection
is changed by pressing the MENU button again, or by
selecting some other function.
To adjust the speaker level whilst the test tone is being
X
output from a particular speaker, press the SET UP (
or ) button.
The speaker level can be adjusted within a range of +7dB
to -7dB, in 1dB steps.
If "NO" is selected for any individual speaker's size setting
(page 31), the test tone will not be heard from that
speaker.
Please note that the front left and front right speaker levels
cannot be adjusted using this method.
W