Sharp CD-C491H Operation Manual page 23

(Continued)
Jog dial
DISPLAY
MODE
To manually recall the stations stored in
memory
Each time you turn the jog dial one step the channel number
will change.
After the channel number has been displayed for 2 sec-
onds, the frequency for that channel will appear for 2 sec-
onds, and then the station name will appear.
To switch the display:
Each time the DISPLAY MODE button is pressed whilst an
FM station is tuned in, the display will switch as follows:
Station name (PS)
When the station you are tuning in is not an RDS station or
even if it is an RDS station but there is no station name or
programme type information available, the display will switch
as follows:
"NO PS"
Notes:
"NO PS" or "NO PTY" will flash for about 5 seconds, and
then the frequency will be displayed.
The display can only be switched whilst tuned to the FM
band.
Notes for RDS operation
If any of the following events occur, it does not mean that
the unit is faulty.
"PS" and a station name appear alternately, and the unit
does not operate properly.
If a particular station is not broadcasting properly or a sta-
tion is conducting tests, the RDS reception function may
not work properly.
22
CD-C491H(SUK) TINSE0229AWZZ
Programme type (PTY)
"NO PTY" Frequency
Frequency