Sharp CD-C491H Operation Manual page 10

<P=009>
(Continued)
2 "AA" size batteries
(UM/SUM-3, R6, HP-7
or similar)
Jog
dial
DIMMER
ON/STAND-BY
Remote control
When inserting or removing the batteries, push them towards
the
Installing the batteries incorrectly may cause the unit to mal-
function.
Precautions for battery use:
Insert the batteries according to the direction indicated in the
battery compartment.
Replace all old batteries with new ones at the same time.
+
Do not mix old and new batteries.
-
Remove the batteries if they are weak, or if the unit will not
+
be used for long periods of time. This will prevent potential
-
damage due to battery leakage.
Caution:
Do not use rechargeable batteries (nickel-cadmium battery, etc.).
Notes concerning use:
Replace the batteries if control distance decreases or operation
becomes erratic.
0.2 m - 6 m
(8" - 20')
Periodically clean the transmitter LED on the remote control
and the sensor on the main unit with a soft cloth.
Exposing the sensor on the main unit to strong light may in-
terfere with operation. Change the lighting or the direction of
15
the unit.
15
Keep the remote control away from moisture, excessive heat,
shock, and vibrations.
Main unit operation buttons
The main unit operation buttons are common to all functions
(CD/Tuner/Tape).
Some buttons may have no function, depending on the mode
selected.
When a button indicator is lit, the corresponding button can be
used.
Jog dial
The jog dial is used to select CD track numbers, adjust the clock
and recall a memorised station, etc.
When the jog dial is turned one step, it will stop at an angle
of about 15˚. This has the same effect as pressing the
5
If the jog dial is turned further, it has the same effect as press-
ing the
repeatedly.
To change the brightness of the display
(Remote control operation)
1
Press the ON/STAND-BY button to turn the power on.
2
Press the DIMMER button.
The display will become dimmer.
To return to the original brightness:
Press the DIMMER button again.
9
CD-C491H(SUK) TINSE0229AWZZ
ë
battery terminal.
or / button on the remote control once.
2 4
/ or / button on the remote control
3 5 2 4
/
3