Listening To The Radio - Sharp CD-BA250H Quick Manual

4
4
Turn on your system
The first time the unit is plugged,
the unit will enter the demonstra-
tion mode. You will see words
scroll.
Listening to a CD (CDs)

Listening to the radio

FM stereo mode indicator
FM stereo receiving indicator
Web-site: www.sharp.co.uk/support
1 Press the
X-BASS/DEMO button
to cancel the demon-
stration mode.
1
12 cm (5")
2
8 cm (3")
3
4
5
6
1
2
Help Line: 08705 274277 (office hours)
– 3 –
2
Press the ON/
STAND-BY button to
turn the power on.
Press the CD button.
Press the 7 7 7 7 7 OPEN/CLOSE button to
open the disc tray.
Place the CD(s) on the disc tray, label
side up.
When loading a third disc, press the
DISC SKIP button to turn the disc tray,
then place the CD in the open position.
Press the 7 7 7 7 7 OPEN/CLOSE button to
close the disc tray.
To select the CD you want to listen to
first, press one of s s s s s 1 - s s s s s 3 buttons on
the remote control.
Press the 0 / R 0 / R button to start playback.
0 / R 0 / R 0 / R
Press the TUNER (BAND) button repeat-
edly to select the desired frequency
band (FM or AM).
Press the TUNING/TIME (X X X X X or W W W W W ) but-
ton to tune in to the desired station.
When the TUNING/TIME button is
pressed for more than 0.5 seconds, scan-
ning will start automatically and the tuner
will stop at the first receivable broadcast
station.
To receive an FM stereo transmission:
Press the TUNER (BAND) button to display the
"ST" indicator.
"j j j " will appear when an FM broadcast is in ste-
j j
reo.