Download  Print this page


Mini Komponenten System CD-BA250H/CD-BA2600H besteht aus CD-BA250H/CD-
BA2600H (Hauptgerät) und CP-BA250H/CP-BA2600H (Lautsprecher-System).
Mini-chaîne CD-BA250H/CD-BA2600H composée de CD-BA250H/CD-BA2600H (appareil
principal) et de CP-BA250H/CP-BA2600H (enceintes acoustiques).
Sistema mini CD-BA250H/CD-BA2600H que consta de CD-BA250H/CD-BA2600H (aparato
principal) y CP-BA250H/CP-BA2600H (sistema de altavoces).
CD-BA250H/CD-BA2600H mini komponent system bestående av CD-BA250H/CD-
BA2600H (huvudenhet) och CP-BA250H/CP-BA2600H (högtalarsystem).
Mini sistemi CD-BA250H/CD-BA2600H composto da CD-BA250H/CD-BA2600H (apparec-
chio principale) e CP-BA250H/CP-BA2600H (sistema di diffusori).
CD-BA250H/CD-BA2600H mini systeem bestaande uit CD-BA250H/CD-BA2600H (hoofd-
toestel) en CP-BA250H/CP-BA2600H (luidsprekersysteem).
CD-BA250H/CD-BA2600H Mini Component System consisting of CD-BA250H/CD-
BA2600H (main unit) and CP-BA250H/CP-BA2600H (speaker system).
Siehe Seiten i bis v und D-1 bis D-35.
Se reporter aux pages i à v et F-1 à F-35.
Consulte las páginas i al v y S-1 al S-35.
Hänvisa till sidorna i till v och V-1 till V-35.
Leggere le pagine i a v e I-1 a I-35.
Raadpleeg de bladzijden i t/m v en N-1 t/m N-35.
Please refer to pages i to v and E-1 to E-35.


   Summary of Contents for Sharp CD-BA250H

  • Page 1 Mini Komponenten System CD-BA250H/CD-BA2600H besteht aus CD-BA250H/CD- BA2600H (Hauptgerät) und CP-BA250H/CP-BA2600H (Lautsprecher-System). Mini-chaîne CD-BA250H/CD-BA2600H composée de CD-BA250H/CD-BA2600H (appareil principal) et de CP-BA250H/CP-BA2600H (enceintes acoustiques). Sistema mini CD-BA250H/CD-BA2600H que consta de CD-BA250H/CD-BA2600H (aparato MINI KOMPONENTEN SYSTEM principal) y CP-BA250H/CP-BA2600H (sistema de altavoces). MINI-CHAÎNE CD-BA250H/CD-BA2600H mini komponent system bestående av CD-BA250H/CD-...
  • Page 2 23/EEC, come emendata dalla direttiva 93/68/EEC. possesseur du droit d’auteur, veuillez vous référer aux réglementations Dichiarazione di conformità nationales en vigueur. La società SHARP ELECTRONICS EUROPE GmbH dichiara che il prodotto SHARP MINI SISTEMI CD-BA250H/CD-BA2600H è costruito in conformità El material audiovisual puede consistir en trabajos que tengan derechos alle prescrizioni del D.M.n˚548 del 28/8/95, pubblicato sulla G.U.n˚301 del...
  • Page 3 Bei Eins t el lung d er ON / STAND-BY-Tas te au f STAND-BY is t die Quando il tasto ON/STAND-BY si trova in posizione STAND-BY, all’interno Netzspannung immer noch im Gerät vorhanden. dell’apparecchio c’è ancora la corrente. Wenn die ON/STAND-BY-Taste auf STAND-BY eingestellt wird, kann das Se il tasto ON/STAND-BY si trova nella posizione STAND-BY, l’unità...
  • Page 4 Vorsicht: Advarsel: Das Gerät weder Tropf- noch Spritzwasser aussetzen. Ansonsten besteht Til at forbygge ild og stød risiko, lad vaere med at undsaette denne die Gefahr eines Brandes oder elektrischen Schlages. Es sollten keine mit indretning for drypning eller overstaenkning. Der må ikke anbringes nogen Flüssigkeiten gefüllten Gegenstände wie Vasen auf dem Gerät abgestellt genstande fyldt med vand, som for eksempel vaser, på...
  • Page 5 VORSICHT CAUTION Use of controls, adjustments or performance of procedures other than Verwendung von Regelungen oder Einstellungen bzw. Durchführung von anderen Verfahren als die hierin angegebenen kann zum Aussetzen those specified herein may result in hazardous radiation exposure. gefährlicher Strahlung führen. As the laser beam used in this compact disc player is harmful to the eyes, do not attempt to disassemble the cabinet.
  • Page 6 Eigenschaften der Laserdiode Material: GaAIAs Wellenlänge: 780 nm Emissionsdauer: kontinuierlich Laser-Ausgang: max. 0,6 mW Caractéristiques de la diode laser Matière: GaAIAs Longueur d’onde: 780 nm Durée d’émission: ininterrompue Puissance de sortie laser maximale: 0,6 mW Características del diodo láser Material: GaAIAs Longitud de onda: 780 nm Duración de emisión : continua Salida de láser: máx.
  • Page 7: Table Of Contents

    ENGLISH Introduction Contents Thank you for purchasing this SHARP product. To obtain the best performance from Page „ General Information this product, please read this manual carefully. It will guide you in operating your SHARP product. Precautions ............2 Controls and Indicators .
  • Page 8: Precautions

    SHARP will not be held responsible for any damage resulting from use of this unit with a voltage other than that which is specified.
  • Page 9: Controls And Indicators

    Controls and Indicators „ Front panel Reference page 1. Disc Tray ..........12 2.
  • Page 10: Rear Panel

    Controls and Indicators (continued) „ Display 1 2 3 1. RDS Indicator 2. Programme Type Indicator 3. Traffic Announcement Indicator 4. Extra Bass Indicator 5. FM Stereo Mode Indicator 6. Traffic Information Indicator 18 19 7. Traffic Programme Indicator 9 10 11 12 13 8.
  • Page 11: Speaker System

    „ Speaker system 1. Tweeter 2. Woofer 3. Bass Reflex Duct 4. Speaker Wire „ Remote control Reference page 1. Remote Control Transmitter ....... . . 9 2.
  • Page 12: System Connections

    System Connections FM aerial AM loop aerial Left speaker Right speaker VCR, DVD, etc. not supplied Wall socket (AC 230 V, 50 Hz) ENGLISH...
  • Page 13: Aerial Connection

    „ Aerial connection „ Speaker connection Connect the black wire to the minus (-) terminal, and the red wire to the plus (+) ter- Supplied FM aerial: minal. Connect the FM aerial wire to the FM 75 OHMS socket and position the FM aerial wire in the direction where the strongest Right speaker Left speaker...
  • Page 14 System Connections (continued) „ Placing the speaker system „ Demonstration mode There is no distinction between the right and the left speakers. The first time the unit is plugged, the unit will enter the demonstration mode. You will see words scroll. Left speaker Right speaker To cancel the demonstration mode:...
  • Page 15: Remote Control

    Remote Control „ Battery installation „ Test of the remote control Face the remote control directly to the remote sensor on the unit. 1 Remove the battery cover. 2 Insert the batteries according to the direction indicated in the bat- The remote control can be used within the range shown below: tery compartment.
  • Page 16: Sound Control

    Sound Control „ Volume control Press the VOLUME button to increase the volume and the VOLUME button for decreasing..0 1 2 29 30 MAXIMUM „ Bass control When the power is first turned on, the unit will enter the extra bass mode which emphasises the bass frequencies, and "X-BASS"...
  • Page 17: Setting The Clock

    Setting the Clock Press the TUNING/TIME ( or ) button to adjust the hour and then press the MEMORY/SET button. z Press the TUNING/TIME ( ) button once to advance the time by 1 hour. Hold it down to advance continuously. z When the 12-hour display is selected, "AM"...
  • Page 18: Listening To A Cd (cds)

    Listening to a CD (CDs) This system can play audio CD-R and CD-RW discs just as CD discs, but cannot per- Press the ON/STAND-BY button to turn the power on. form recording. (However, some CD-R and CD-RW discs may not be played.) Press the CD button.
  • Page 19 „ To locate the beginning of a track Press the / ( ) button to start playback. To move to the beginning of the next track: Press the PRESET button for less than 0.5 seconds during playback. z You can skip to any track by pressing the PRESET button repeatedly until the desired track number appears.
  • Page 20: Starting Playback With A Desired Track

    Starting Playback with a Repeat or Random Play Desired Track „ Repeat Play All tracks on up to 3 discs, or a programmed sequence can be continuously repeated. You can play a disc starting with the desired track. To repeat all tracks on up to 3 discs: Whilst in the stop mode, press one of the 3 buttons on the Press the...
  • Page 21: Programmed Play

    Programmed Play By specifying discs from 1 to 3, and tracks from 1 to 99, you can choose up to 32 Press the PRESET selections for playback in the order you like. PRESET button to se- lect the desired track. Selected track number You can also select a track by pressing the button on the...
  • Page 22: Listening To The Radio

    Listening to the Radio Press the ON/STAND-BY button to turn the power on. Press the TUNER (BAND) button repeatedly to select the desired frequency band (FM or AM). Press the TUNING/TIME ( ) button to tune in to the desired station.
  • Page 23: Listening To The Memorised Station

    Listening to the Memorised Station „ Memorising a station „ To recall a memorised station You can store 40 AM and FM stations in memory and recall them at the push of a but- Press the PRESET PRESET button for less than ton.
  • Page 24: Using The Radio Data System (rds)

    Using the Radio Data System (RDS) „ Information provided by RDS RDS is a broadcasting service which a growing number of FM stations provide. These FM stations send additional signals along with their regular programme Each time the DISPLAY MODE button is pressed, the display will switch as fol- signals.
  • Page 25 Descriptions of the PTY (Programme Type) codes, TP (Traffic Programme) and SOCIAL Programmes about people and things that influence them individually TA (Traffic Announcement). or in groups. Includes: sociology, history, geography, psychology and You can search for and receive the following PTY, TP and TA signals. society.
  • Page 26 Using the Radio Data System (RDS) (continued) „ Using the Auto Station Programme Mem- To stop the ASPM operation before it is complete: Press the ASPM button whilst it is scanning for stations. ory (ASPM) The stations which are already stored in memory will be kept there. Whilst in the ASPM operation mode, the tuner will automatically search for new RDS Notes: stations.
  • Page 27 „ To recall stations in memory Notes: z If the display has stopped flashing, start again from step 2. If the unit finds out a To specify programmed types and select stations (PTY search): desired programme type, corresponding channel number will flash for about 4 sec- You can search a station by specifying the programme type (news, sports, traffic pro- onds, and then the station name will flash for 7 seconds, and then will remain lit.
  • Page 28 Using the Radio Data System (RDS) (continued) „ To automatically play the desired pro- When the specified programme starts on an ON (other network) gramme (EON-PTY) station, the unit will automatically switch to the station and "PTY" will flash. When the desired type of programme is broadcast, the radio switches to it automati- cally.
  • Page 29 „ To automatically play the traffic informa- When a TA specified starts on an ON (other network) station, the tion (EON-TI) unit will automatically switch to that station, and "TI" will flash. When the traffic information is broadcast, the radio will switch to it automatically. Tune in to an RDS station (when a station name is displayed).
  • Page 30: Notes For Rds Operation

    Using the Radio Data System (RDS) (continued) „ Notes for RDS operation About the "TP" and "TA" indicators: "TP" "TA" Meaning If any of the following events occur, it does not mean that the unit is faulty: Not lit Not lit Does not carry traffic announcements nor does it refer, via z "PS", "NO PS"...
  • Page 31 „ To set the internal clock by the RDS time Notes: z When the CLOCK button is pressed whilst the RDS time is displayed, the internal signal clock is displayed followed by the RDS clock. With this feature, you can compare the time shown.
  • Page 32: Listening To A Cassette Tape (tape 1 Or Tape 2)

    Listening to a Cassette Tape (TAPE 1 or TAPE 2) Before playback: Playback is possible in TAPE 1 compartment as well as in TAPE 2. z For playback, use normal or low-noise tapes for the best sound. Press the ON/STAND-BY button to turn the power on. (Metal or CrO tapes are not recommended.) z Do not use C-120 tapes or poor-quality tapes, as they may cause mal- Open the cassette door by pushing the area marked "...
  • Page 33: Recording From The Radio

    When recording important selections, make a preliminary test to ensure that the only. desired material is properly recorded. z SHARP is not liable for damage or loss of your recording arising from malfunction Tune in to the desired station. (See page 16.) of this unit.
  • Page 34: Recording From A Cd (cds)

    Recording from a CD (CDs) You can record 3 CDs continuously. Press the ON/STAND-BY button to turn the power on. Load a cassette into the TAPE 2 cassette compartment with the side to be recorded on facing you. Wind past the leader of the tape, on which recording cannot be performed. Press the CD button and load the desired disc.
  • Page 35: Dubbing From Tape To Tape

    Dubbing from Tape to Tape You can record from TAPE 1 to TAPE 2. For recording, use only normal tapes. Do not use metal or CrO tapes. Press the ON/STAND-BY button to turn the power on. Load a prerecorded cassette into the TAPE 1 cassette compart- ment.
  • Page 36: Timer And Sleep Operation

    Timer and Sleep Operation „ Timer playback or Timer recording Timer playback: The unit turns on and plays the desired source (CD, tuner, tape) at the preset time. Before setting timer: Timer recording: Press the CLOCK button to check that the clock is on time. The unit turns on and starts recording from the tuner at the preset time.
  • Page 37: Sleep Operation

    „ Sleep operation Press the TUNING/TIME ( ) button to specify the minutes, then press the MEMORY/SET button. Play back the desired sound source. Press the TIMER/SLEEP button repeatedly until "SLEEP" is dis- played. The unit will enter the timer stand-by mode automatically. To change the sleep time: Whilst the sleep time is displayed, press the TUNING/TIME ( ) button.
  • Page 38: Enhancing Your System

    Enhancing Your System „ Listening to the playback sounds from The connection lead is not included. Purchase a commercially available lead as shown below. VCR, DVD, etc. VCR, DVD, etc. Use a connection lead to connect the VCR, DVD, etc. to the VIDEO/ AUX sockets.
  • Page 39: Troubleshooting Chart

    If something is wrong with this product, check the following before calling your autho- Symptom Possible cause rised SHARP dealer or service centre. z Cannot record. z Is the erase-prevention tab removed? „ General z Cannot record tracks with proper z Is it a normal tape? (You cannot record on sound quality.
  • Page 40: Maintenance

    Maintenance Troubleshooting Chart (continued) „ Cleaning the tape-handling parts „ If trouble occurs z Dirty heads, capstans or pinch rollers can cause poor sound and tape jams. Clean When this product is subjected to strong external interference (mechanical shock, these parts with a cotton swab moistened with commercial head/pinch roller excessive static electricity, abnormal supply voltage due to lightning, etc.) or if it is cleaner or isopropyl alcohol.
  • Page 41: Specifications

    Specifications „ Tuner As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. Frequency range FM: 87.5 - 108 MHz...
  • Page 42: Sharp Corporation


This manual also for:


Comments to this Manuals

Symbols: 0
Latest comments: