Setup Settings - Sharp AQUOS LC-20S5E-BK Operation Manual

Setup Settings


Press MENU to display the Menu screen.
2
Press ◀/▶ to select "Setup".
3
Press ▲/▼ to select the desired item, and press OK.
4
Press ▲/▼ to select the desired mode, and press OK.
5
Press END to exit.
Selected item
Programmes
First installation
Wide mode
EXT connections
Language
* This item is visible only when "EXT1" or "EXT2" is selected for the "EXT connections" setting.
1
NOTE
EXT connections:
• If no (colour) image is displayed, try to change to a different signal type.
• Switching between AV input signals may be slow, depending on the settings in "Colour system". If you want to speed up signal switching,
select "Auto" in "Colour system" to the current reception colour system.
See page 12.
See page 8.
See page 13.
It is possible to manually adjust various settings for connections with external devices on the "EXT
connections" screen. Select the appropriate signal type and colour standard for the signals from the video
equipment connected to the EXT1, EXT2 or EXT3 terminal.
EXT1 Signal type*
EXT2
Colour system
EXT3 (Y/C)
EXT3 (CVBS)
The language for the on-screen display can be selected from English, Spanish, German, French, Italian,
Swedish, Dutch, Russian, Portuguese, Turkish, Greek, Finnish, and Polish.
Useful Features (continued)
Choice/Description
Auto, CVBS, RGB, Y/C: To select the signal type of external equipment.
1
Auto, PAL, SECAM, NTSC4.43, NTSC3.58, PAL60

