Using The Programme Table; Wide Mode; Feature Settings - Sharp AQUOS LC-20S5E-BK Operation Manual

Using the Programme Table

The Programme table shows a list of all receivable
programmes. They are located in channels 1 to 99.
To select the desired programme
1
Press OK to display the Programme table.
2
Press ▲/▼/◀/▶ to select the desired programme.
• To display the next or previous list of the Programme table,
press ▲/▼ when the cursor is at a programme in the lower-right
or upper-left position, or press ◀/▶ when the cursor is at a
programme in the right or left column.
3
Press OK to display the selected programme.

Wide Mode

You can select the picture size. Selectable picture size varies with the type of signal received.
1
Press MENU to display the Menu screen.
• The Wide mode menu can be displayed directly by pressing
the (Wide Mode) button.
2
Press to select "Setup".
◀/▶
3
Press to select the "Wide mode", and press OK.
▲/▼
4
Press to select the desired mode, and press OK.
▲/▼
5
Press END to exit.

Feature Settings

1
Press MENU to display the Menu screen.
2
Press to select "Features".
◀/▶
3
Press to select the desired item, and press OK.
▲/▼
4
Press to select the desired mode, and press OK.
▲/▼
5
Press END to exit.
Selected item
Power management*
1
Sleep timer*
2
Auto power off
Blue screen
Child lock
* This item is visible only when TV is PC mode.
1
* The status display appears by pressing SLEEP.
2
Choice
On
• If there is no signal input for 8 minutes, the TV enters the standby mode.
• Even if you start using the PC and the signal inputs again, the TV stays in standby
mode.
Off
• The TV turns on again by pressing
(See page 8.)
Off
You can set "Sleep timer" to automatically turn off the LCD TV set.
30 min
60 min
90 min
120 min
On You can set the power to automatically turn off if there is no signal for 5 minutes.
Off
On You can set the TV to automatically change to a blue screen and mute the sound if
the signal is weak or absent, or when there is no input from an external device.
Off
See page 14.
Useful Features (continued)
Choice
Auto The optimum Wide mode is automatically chosen
for every broadcast, even if broadcast signal
format will be changed, and VCR or DVD
containing the WSS information.
4:3 For 4:3 "standard" pictures.
For 16:9 signals the picture will expand to full size
format. With some programmes may appear on
the top and bottom further on black bars.
16:9 For 16:9 letterbox pictures. Bars appear on the
top and bottom.
Description
on the TV or
TV/AV only
Description
on the remote control unit.

13