Child Lock - Sharp AQUOS LC-20S5E-BK Operation Manual

Useful Features (continued)

Child Lock

Important:
• Please refer to page 19 for "IMPORTANT NOTE ON
DISENGAGING ADVANCED CHILD LOCK".
The Child lock function blocks the viewing of any channels.
To use this function, you need to define your PIN (Personal
Identification Number) first.
[] Defining a PIN

Press MENU to display the Menu screen.
2
Press ◀/▶ to select "Features".
3
Press ▲/▼ to select "Child lock", and press OK to display the
PIN input screen.
4
Input the desired four-digit PIN (e.g. 1234) with Channel
Select.
NOTE
• Be sure to make a note of your PIN before pressing OK.
• The PIN will not be set if MENU or END is pressed before the
fourth digit has been input.
5
Press OK to accept the input PIN.
6
Press END to exit.
[2] Setting a Child Lock
• There are two different ways of activating a Child lock:
1. General child lock for all programmes
2. Programme-position-related child lock
To set a Child Lock for all programmes

Perform steps  to 3 in [] Defining a PIN to display the PIN
input screen.
2
Input your four-digit PIN (e.g. 1234) with Channel Select.
• When the PIN is correctly input, the "Child lock" screen is
displayed.
3
Press ▲/▼ to select "For all programmes", and press OK.
4
Press ▲/▼ to select "Yes", and press OK.
• The lock remains effective until "No" is selected.
5
Press END to exit.
4

To set a Child Lock for individual programmes

Perform steps  and 2 in [2] Setting a Child Lock to display
the "Child lock" screen.
2
Press ▲/▼ to select "For individual prog. only", and press OK.
3
Press ▲/▼/◀/▶ to select the desired programme.
4
Press OK to lock the programme.
• The locked programme is displayed in red.
NOTE
• To unlock the programme, select the programme, and press OK .
• The Child lock remains effective until it is cancelled.
5
Press END to exit.
[3] Changing/Cancelling a PIN
To change a PIN

Perform steps  and 2 in [2] Setting a Child Lock to display
the "Child lock" screen.
2
Press ▲/▼ to select "Change PIN", and press OK.
• The currently defined PIN is displayed.
3
Input the new four-digit PIN (e.g. 5678) with Channel Select,
and press OK.
4
Press END to exit.
To cancel a PIN

In step 2 above, press
press OK.
2
Press to select "Yes", and press OK.
▲/▼
[4] Temporarily cancelling the Child Lock setting
You can view a programme for which a Child lock has
been set by temporarily cancelling the Child lock setting.
Perform the procedure below to input your PIN and cancel
the Child lock if you are prompted to do so.
When the PIN input screen is displayed, input your PIN
with Channel Select.
• The normal screen appears when the PIN is correctly
input.
to select "Cancel PIN", and
▲/▼