Opening Lists With The Message Key - Siemens Gigaset S670 User Manual

The following functions can be selected
with q:
Copy to Directory
Copy an entry to the directory
(page 19).
Automatic Redial
The selected number is automatically
dialled at fixed intervals (at least every
20 seconds). The handsfree key flashes
and "open listening" is activated.
– Called party answers: press the talk
key c. The function is ended.
– Called party does not answer: the
call is terminated after approx.
30 seconds. The function is ended
after pressing any key or after ten
unsuccessful attempts.
(as in the directory,
Display Number
page 20)
Delete Entry (as in the directory, page 20)
Delete List (as in the directory, page 21)
Opening lists with the
message key
You can use the message key f to open
the following list selection:
u
SMS list
If several mailboxes are set up
(page 32), several lists are displayed.
u
Answer machine list (Gigaset S675
only) or network mailbox, if your net-
work provider supports this function
and the fast access is set for the net-
work mailbox (page 41).
u
Call history
Using the directory and lists
An advisory tone sounds as soon as a new
message arrives in a list. The f key
flashes (it goes off when the key is
pressed). In idle status, the display shows
an icon for the new message:
Icon New message...
Ã
... in the answer machine list
(Gigaset S675 only) or on the
network mailbox
Á
... in the call history
À
... in SMS list
The number of new entries is shown
beneath the corresponding icon.
List selection
If you press the message key f, only the
lists that contain messages are shown
(exception: network mailbox). Lists with
new messages are identified in bold:
Messages & Calls
Mailbox (2)
SMS: (1)
Calls List: (4)
"
OK
Select a list with q. To open, press v
or .
§OK§
If only one list contains entries, no list
selection is offered and the relevant list is
displayed immediately.
Incoming SMS message list
All received SMS messages are saved in
the incoming message list, page 30.
23