Table of Contents
Advertisement
Setting the alarm clock
Press the display key to save
§Save§
the input.
a
Press and hold (idle status).
You will hear the error tone (descending
tone sequence) if you assign an internal
number twice.
¤
Repeat the process with an unused
number.
Setting the alarm clock
Requirement: The date and time have
already been set (page 12).
Activating/deactivating and setting the
alarm clock
¢
v
ì
¤
Change multiple line input:
Activation:
Select
On
or Off.
Time:
Enter the wake-up time in 4-digit
format. Select 12-hour or 24-hour time
format.
¤
With 12-hour time format, use the dis-
play key
to switch between am
§am/pm
and pm.
Melody:
Select melody.
Volume:
Set the volume (1-6).
¤
Save changes (page 6).
You will see the icon ¼.
A wake-up call with the selected ringer
melody is signaled on the handset. The
wake up call sounds for 60 seconds. The
display shows
Alarm Clock
pressed the wake-up call is repeated twice
at five minute intervals and then switched
off.
During a call, the wake-up call is signaled
by a short tone.
28
. If no key is
Deactivating the wake-up call/
repeating after a pause (sleep mode)
Requirement: A wake-up call is sounding.
Press the display key. The
§OFF§
wake-up call is deactivated.
Or:
Press the display key or any
§Snooze§
key. The wake-up call is deacti-
vated and then repeated after
5 minutes. After the second
repetition the wake-up call is
deactivated completely.
Restoring the handset
default settings
You can reset any individual settings and
changes you have made. This will not
affect entries in the directory, calls list or
the handset's registration to the base sta-
tion.
¢
¢
v
Ð
Handset
Press the display key.
§Yes§
a
Press and hold (idle status).
Cancel the restoring process by pressing
a or the display key
¢
Reset Handset
.
§No§
Advertisement
Table of Contents
