Setting Up The Handset For Use - Siemens Gigaset S18H Operating Instructions Manual

First Steps
Connecting the charging cradle
¤
Connect the power adapter to the wall
➀
outlet .
¤
Connect the power adapter to the base
➁
plug socket .
➀
If you need to disconnect the plug from
the charging cradle, press the release but-
➀
ton and disconnect the plug
8
Please note:
u
Never expose the telephone to the
influence of heat sources, direct sun-
light or other electrical devices.
u
Protect your Gigaset S18H from mois-
ture, dust, corrosive liquids and
vapours.

Setting up the handset for use

Carry out the following steps for each
handset.
Inserting the batteries
➁
Caution:
Use only rechargeable nickel-metal hydride
(NiMH) UL-approved AAA batteries. Never use
conventional (non-rechargeable) batteries or
other battery types as this may cause signifi-
cant damage to health and property. For
example, the outer casing of the batteries
could be destroyed or the batteries could
explode. The phone could also malfunction or
be damaged as a result of using batteries that
are not of the recommended type.
¤
Fit the batteries with the correct polar-
ity (see diagram).
➁
.
The polarity is indicated in/on the battery
compartment.