Setting Pauses; Switching Temporarily To Tone Dialling (Dtmf) - Siemens Gigaset S790 User Manual

Connecting the base to the PABX

Setting pauses

Changing the pause after line
seizure
You can change the length of the pause that
is inserted between pressing the talk key c
and sending the number.
v
Open the main menu.
*#Q5# L
Press keys.
~
Enter number for the length of
the pause (1 = 1 sec.; 2 = 3 secs.;
3 = 7 secs.) and press
Change pause after recall key
You can change the length of the pause if
your PABX requires this (refer to the user
guide for your PABX).
v
Open the main menu.
*#Q5# 2
Press keys.
~
Enter a number for the length of
the pause (1 = 800 ms;
2 = 1600 ms; 3 = 3200 ms) and
§OK§
press
Changing a dialling pause (pause
after access code)
Prerequisite: You have saved an access code
¢
( page 71).
v
Open the main menu.
*#Q5#
Press keys.
~
Enter number for the length of
the pause
(1 = 1 sec.; 2 = 2 secs.;
3 = 3 secs.; 4 = 6 secs.)
and press
To insert a dialling pause: press and hold
S for 2 seconds. A P appears in the dis-
play.
72
§OK§
.
.
§OK§
.
Switching temporarily to
tone dialling (DTMF)
If your PABX still operates with pulse dialling
(PD), but you need tone dialling for a con-
nection (e.g., to listen to the network mail-
box), you must switch to tone dialling for the
call.
Prerequisite: You are conducting a call or
have already dialled an external number.
*
Press the star key.
After the call ends, pulse dialling is automat-
ically activated again.