Preparation; Supplied Accessories; Attaching The Stand Unit - Sharp Aquos LC-32DH66E Operation Manual

Preparation

Supplied accessories

Remote control unit
(g1)
Product shape varies in
Pages 3 and 6
• Operation manual (This publication)

Attaching the stand unit

• Before attaching (or detaching) the stand, unplug the AC cord from the AC INPUT terminal.
• Before performing work, spread cushioning over the surface on which you will be laying the TV. This will prevent
it from being damaged.
CAUTION
•
Attach the stand in the correct direction.
• Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.
1
Confirm that there are eight screws with the stand unit.
2
LC-32DH66E/LC-37DH66E: Attach the
supporting post for the stand unit onto the base
using the four screws with the screw driver
(supplied) as shown.
LC-46DH66E/LC-52DH66E: Attach the
supporting post for the stand unit onto the base
using the four long screws with the hex key
(supplied) as shown.
LC-32DH66E/LC-37DH66E:
1
2
3
Soft cushion
NOTE
• To detach the stand unit, perform the steps in reverse order.
AC cord (g1) Cable clamp (g1)
some countries.
Page 8
Supporting post
LC-32DH66E
LC-37DH66E
Page 8
• "AAA" size alkaline battery (g2) ... Page 6
3
Inserting the stand.
1
Insert the stand into the openings on the
bottom of the TV (Hold the stand so it will
not drop from the edge of the base area).
2
LC-32DH66E/LC-37DH66E: Insert and
tighten the four screws into the four holes
on the rear of the TV.
LC-46DH66E/LC-52DH66E: Insert and
tighten the four short screws into the four
holes on the rear of the TV.
LC-46DH66E/LC-52DH66E:
1
2
Supporting post
3
Short
screw
Stand unit (g1)
LC-46DH66E
LC-52DH66E
Page 5
Hex key
Long
screw
Soft
Hex key
cushion
5