Important Safety Instructions - Sharp R-3731 Operation Manual

900 w microwave oven
Table of Contents

Advertisement

R-3731 English
21/07/2004

IMPORTANT SAFETY INSTRUCTIONS

Other warnings
Never modify the oven in any way.
Do not move the oven while it is in operation.
This oven is for home food preparation only and
may only be used for cooking food. It is not
suitable for commercial or laboratory use.
To promote trouble-free use of your oven
and avoid damage.
Never operate the oven when it is empty.
When using a browning dish or self-heating
material, always place a heat-resistant insulator
such as a porcelain plate under it to prevent
damage to the turntable and roller stay due to heat
stress. The preheating time specified in the dishes
instructions must not be exceeded.
Do not use metal utensils, which reflect microwaves
and may cause electrical arcing. Do not put cans
in the oven.
Use only the turntable and the roller stay designed
for this oven.
To prevent the turntable from breaking:
(a) Before cleaning the turntable with water, leave
the turntable to cool.
(b) Do not put hot foods or hot utensils on a cold
turntable.
(c) Do not put cold foods or cold utensils on a hot
turntable.
Do not place anything on the outer cabinet during
operation.
NOTE:
If you are unsure how to connect your oven, please
consult an authorised, qualified electrician.
Neither the manufacturer nor the dealer can accept
any liability for damage to the oven or personal
injury resulting from failure to observe the correct
electrical connection procedure.
Water vapour or drops may occasionally form on
the oven walls or around the door seals and
sealing surfaces. This is a normal occurrence and is
not an indication of microwave leakage or a
malfunction.
12:40
Page 6
IMPORTANT! ELECTRICAL CONNECTION.
• Do not allow water to come into contact with the
• Insert the plug properly into the socket.
• Do not connect other appliances to the same
• If the plug or socket is loose or the power supply
• When removing the plug from the socket always
• If the fitted mains plug to your oven is a
• If the plug fitted to your oven is a non-rewirable
Danger:
The fuse from the cut-off plug should be removed
and the plug disposed of in a safe manner.
Under no circumstances should the cut-off plug be
inserted into a socket outlet as a serious electric
shock may occur.
The plug must not be used without the fuse cover
fitted.
If you have any doubt about your microwave oven
obtain the help of a qualified electrician.
When replacing the plug please ensure that you
use a BSI or ASTA approved plug to BS1363, this
should be fitted with a brown coloured 13 amp
fuse approved by BSI or ASTA to BS1362. If you
have any doubt about electrical connection seek
the help of a qualified electrician.
To wire an appropriate plug, follow the wiring code
given in `To replace the mains plug' on page 7.
6
power supply cord or plug.
socket using an adaptor plug.
cord is damaged, it must be replaced with a
special cord. The exchange must be made by a
SHARP approved service facility.
grip the plug, never the cord as this may
damage the power supply cord and the
connections inside the plug.
rewireable type and in the unlikely event of the
socket outlet in your home not being compatible
with the plug supplied, remove the plug and fit an
appropriate type, observing the wiring code given
in `To replace the mains plug' on page 7.
If you wish to remove or replace the plug
supplied, ensure the plug is removed properly and
not cut off.
plug and in the unlikely event of the socket outlet
in your home not being compatible with the plug
supplied, cut-off the mains plug and fit an
appropriate type, observing the wiring code
given in `To replace the mains plug' on page 7.
WARNING: THIS APPLIANCE MUST BE
EARTHED

Advertisement

Table of Contents
loading

Table of Contents