Using Your Machine; Measure Out The Detergent; Add The Fabric Softener If Required; Select The Required Option - Tricity Bendix WDR1020 Operating And Installation Instructions

Front-loading washer
Table of Contents

Advertisement

USING YOUR MACHINE

WASHING 4.5 KG OF WHITE COTTON AT 95°C
Suppose you have 4.5 kg of normally dirty laundry to
wash. It is white cotton and is suitable for high tempera-
ture washing.
1 Load the laundry
P0004

2 Measure out the detergent

C0026
Pull out the detergent dispenser drawer from the control
panel. Measure out the amount of detergent required
and pour into the main wash compartment.
If you wish to carry out a programme with prewash, pour
the amount of detergent required into the «prewash»
compartment.

3 Add the fabric softener if required

C0024

4 Select the required option

Depress HALF LOAD, if desired.
Open the door by pulling
the catch outward. Load
the items one at a time
and close the door.
C0025
Pour the fabric softener, if
required, into the compart-
ment marked
.
Do not exceed the MAX
level and then close the
drawer gently.
5 Select the required wash programme
2
M0014
6 Start the machine
Before starting up the machine check that:
the appliance is plugged in
the water supply taps are turned on
the drain hose is correctly and securely positioned
the door and the detergent dispenser drawer are
closed.
MAINS ON
T0009
7 At the end of the programme
The machine stops automatically.
The door is controlled by a safety device which releases
2 minutes after the end of the programme.
Switch the machine off by depressing the ON/OFF but-
ton again. The mains-on light goes out.
When the programme has finished you are advised to
unplug the appliance and turn off the water taps.
Turn the programme
selector dial clockwise to
the required programme.
Depress the ON/OFF but-
ton: the mains-on light illu-
minates and the machine
starts operating.
13

Advertisement

Table of Contents
loading

Table of Contents