Changing To Lp - Harman Stove Company HB 38 DV Installation And Operating Manual

Only For Qualified Installers
3
Remove Orifice
Cover
6
4
Remove Rear Burner by
Remove Screw
sliding to the left.
Remove
5
Flame Bridge
INSTALLATION

Changing to LP

Remove screw
1
7
Lift up on front of burner/grate/
screen assembly and then slide
left about 1/2". The assembly can
then be removed.
8
Remove pilot tower
with a 7/16" wrench.
Replace Natural Gas
orifice with LP
orifice.
These kits are only for use in the Serenity series fireplaces.
Note: The difference between the top and rear LP kit is the
size of the rear orifice (#59 for top and #60 for rear).
25
Remove Air
2
Deflector
LP Conversion Kit
LP Rear Orifice.
#60 Rear Flue,
#59 Top Flue.
Top Vent LP Kit
Rear Vent LP Kit
LP Orifice Box Cover
LP Pilot Orifice
LP Front Orifice #52
LP Conversion label
LP Valve
Conversion
Module
LP Conversion
Instructions
Part No. 1-00-08770
Part No. 1-00-08771