Tape Playback; Listening To A Cassette Tape; Tape Play Indicator - Sharp XL-MP110H Operation Manual

Listening to a cassette tape

Before playback:
For playback, use normal or low-noise tapes for
the best sound. (Metal or CrO tapes are not rec-
ommended.)
Do not use C-120 tapes or poor-quality tapes, as
they may cause malfunctions.
Before loading a tape into the cassette compartment,
tighten the slack with a pen or a pencil.
/
/
ASPM
PTY.TI
SEARCH
DISPLAY
MODE

Tape playback

1
Press the ON/STAND-BY button to turn the power on.
2
Press the TAPE button.
3
Open the cassette door by push-
ing the area marked " PUSH
EJECT".
4
Load a cassette into the cas-
sette compartment with the side
to be played on facing you.
5
Press the / (TAPE ) button.

Tape Play indicator

Auto power on function:
When you press any of the following buttons, the unit turns on.
TAPE button (main unit and remote control): The unit turns on and
the "TAPE" function is activated.
TAPE button on the remote control: The unit turns on and play-
back starts (regardless of the last function).
/ button on the main unit: The unit turns on and playback of
the last function starts (CD, TAPE, TUNER, VIDEO/AUX).
Auto power off function:
In the stop mode of tape operation, the main unit enters the stand-by
mode after 15 minutes of inactivity.
XL-MP110H
ENGLISH
8
E-22