Recording On A Cassette Tape - Sharp XL-HP888H Operation Manual

" Various tape functions
Function Main unit Remote
control
Side A play-
back
Side B play-
back
Stop
Fast for-
ward/Fast
rewind
Caution:
! To remove the cassette, press the
open the compartment.
! If a power failure occurs during tape operation, the tape head will
remain engaged with the tape and the cassette door will not
open. In this case, wait until the power is restored.

Recording on a cassette tape

Before recording:
! When recording important selections, make a preliminary test to
Operation
ensure that the desired material is properly recorded.
! SHARP is not liable for damage or loss of your recording arising
Press in the stop
from malfunction of this unit.
mode.
! The volume and sound controls can be adjusted with no effect
on the recorded signal (Variable Sound Monitor).
! For recording, use only normal tapes. Do not use metal or
CrO tapes.
Press in the stop
mode.
Erase-prevention tab of cassette tapes:
! When recording on a cassette tape, make sure that the erase-
prevention tabs are not removed. Cassettes have removable
Press in the playback,
tabs that prevent accidental recording or erasing.
fast forward or fast re-
! To protect the recorded sound, remove the tab after recording.
wind mode.
Cover the tab hole with adhesive tape to record on the tape with-
out the tab.
Press in the playback
or stop mode.
(TAPE ) button, and then
04/1/27
Side A
Tab for side A
Tab for side B
XL-HP888H(H)E3.fm
TINSZA041AWZZ
XL-HP888H
ENGLISH
8
E-28