Table of Contents
Advertisement
Enhancing your system
XL-HP888H
ENGLISH
The connection lead is not included. Purchase a commercially avail-
able lead as shown below.
Red White
Auto power on function:
When you press any of the following buttons, the unit turns on.
! VIDEO/AUX button (main unit and remote control): The unit turns
on and the "VIDEO" function is activated.
!
/
button on the main unit: The unit turns on and playback of
the last function starts (CD/TAPE/TUNER/VIDEO).
E-41
" Listening to the playback sounds from VCR,
DVD, etc.
VCR, DVD, etc.
1
Use a connection lead to connect the VCR, DVD, etc. to the
VIDEO/AUX IN sockets.
When using video equipment, connect the audio output to this
unit and the video output to a television.
To the line
output sockets
2
Press the ON/STAND-BY button to turn the power on.
3
White
Red
Press the VIDEO/AUX button.
4
Play the connected equipment.
Note:
To prevent noise interference, place the unit away from the televi-
RCA lead
sion.
(not supplied)
" To record on a tape
1
Insert a cassette in the cassette compartment.
2
Press the VIDEO/AUX button.
3
Press the
4
Press the
5
Play the VCR, DVD, etc.
" Headphones
! Before plugging in or unplugging the headphones, reduce the
volume.
! Be sure your headphones have a 3.5 mm (1/8") diameter plug
and are between 16 ohms and 50 ohms impedance. The recom-
mended impedance is 32 ohms.
! Plugging in the headphones disconnects the speakers automati-
cally. Adjust the volume using the VOLUME control.
04/1/27
button.
/
( ) or
( ) button.
XL-HP888H(H)E4.fm
TINSZA041AWZZ
Advertisement
Table of Contents
