Table of Contents
Advertisement
Sound Control
You can make a fine adjustment of SQ and Position.
1
Set the SQ mode to on.
2
Hold down [CS] (SQ) for 2 sec. or more
to display the audio menu display.
3
Press [
}
] or [
{
] to select a function to
be adjusted.
4
Press [BAND]
(SET) to adjust.
5
Adjust the setting value.
[}][{][]][[]: Select
[BAND] (SET):
Confirm
6
Press [DISP] to confirm the adjustment.
18
CQ-C9901N/C9701N
SQ PRESET SELECT
Select your favorite type from 6 kinds of SQ Presets.
Note: You can also select the SQ preset number by
CS
CS
SRC
pressing [1] to [6] on the remote control.
SQ ADJUSTMENT (SQ9)
You can make a fine adjustment to the currently selected
SQ presetting in each type (except FLAT).
[
][
]: Frequency band
]
[
selection
qw:
Frequency selection
[
][
]: Level up/down
}
{
Note: If you hold down [BAND] for 2 sec. or more, the
presetting that is called up can be turned into the default.
SQ PRESET MEMORY
The current value is assigned to one of SQ preset 2 to 6.
1
Select a preset number by pressing
or
.
[{], []]
[[]
2
Hold down [BAND] for 2 sec. or more.
Note: You can also select the SQ preset number by
pressing [2] to [6] on the remote control, and assign the
current value to the selected preset number by holding
down the same button for 2 sec. or more.
POSITION
You can make the optimal sound field in accordance with
your seat.
Radio
A radio DSP is integrated into this unit. The IF filter allows the radio to adjust the bandwidth automatically to maintain optimum
reception.
1
Press [SRC: SOURCE] to select the
radio mode.
2
Press [BAND] to select a band.
Notes:
¡
For tuning in on only stations whose receiving condi-
tions are good in the station search, set LOCAL to ON.
(a
page 21)
¡
For reducing noise when a receiving FM stereo wave
is weak, set MONO to ON.
[}],
Preset Number
Band
Lights while receiving an FM stereo signal.
("STEREO": CQ-C9701N)
Lights when MONO is activated.
(a
page 21)
SRC
CS
SRC
3
Select a station.
Frequency adjustment
[]] (TUNE):
Lower
[[] (TUNE):
Higher
Note: Hold down for 0.5 sec. or more and release
for station search.
Preset station selection
[{] (P·SET: PRESET): Lower preset number
[}] (P·SET: PRESET): Higher preset number
Notes:
(a
page 21)
¡
Direct Access can be executed with [1] to [6] but-
tons on remote control.
¡
Stations in FM 1 to 3 are sequentially selectable
without changing bands when "ALL BAND" is
selected in "AUTO PRESET".
CQ-C9901N/C9701N
Frequency
Indicates the intensity of
the radio wave.
Lights when LOCAL is
activated.
(a
page 21)
19
Advertisement
Table of Contents
