Radio Basics - Panasonic CQ-DFX983N Operating Instructions Manual

Radio Basics

This chapter explains how to listen to the radio.
Operation Flow
CQ-DFX983N
TA
Radio mode display
Band
Frequency
LOCAL Indicator
Preset Number
STEREO/MONO (Monaural) Indicator
Notes:
¡
For tuning in on only stations whose receiving condi-
tions are good in the station search, set LOCAL to ON.
a
( Page 12)
¡
For reducing noise when a receiving FM stereo wave is
a
weak, set FM MONO to ON. ( Page 12)
10
CQ-DFX983/903N
1
Press (SOURCE) to select the radio
mode.
2
Press (BAND) to select a band.
OPEN
Band
3
Select a station
Station search
Lower: Hold down (TUNE]) for 0.5 sec. or more
then release it.
Higher: Hold down (TUNE[) for 0.5 sec. or more
then release it.
Frequency adjustment
Lower: Press (TUNE]).
Higher: Press (TUNE[).
Preset station selection
Lower preset number:
Press (P·SET Preset{).
Higher preset number:
Press (P·SET Preset}).
Note: Direct selection can be executed with
buttons on remote control.
Often-tuned
Station Preset
(Preset)
to 6
1
Up to 6 stations can be preset in AM, FM1, FM2, and FM3 respectively.
Preset stations can be simply called up by pressing
(P·SET Preset{).
Note: Direct selection can be executed with remote control buttons
Auto Preset Memory (APM)
1
Select a band.
2
Hold down (APM Auto Preset Memory) for 2 sec. or more.
Up to 6 best receiving stations are preset.
The preset stations under best receiving conditions are received for 5 sec. each after presetting
the stations (SCAN). To stop scanning, press
Preset{).
Notes:
¡ New stations overwrite existing saved stations.
¡ Only RDS stations will be saved at default setting (AF ON). To select non RDS stations too, set AF
OFF.(a Page 13)
Manual station preset
1
Tune in to a station.
2
Hold down (P·SET Preset}) or
sec. or more.
3
Select a preset number by pressing
(P·SET Preset}) or
(P·SET Preset{).
4
Preset the station by holding down
(P·SET Preset}) or (P·SET Preset{)for 2 sec. or more.
Frequency/preset number blinks once.
Notes:
¡ New stations overwrite existing saved stations.
¡ In step 2, a station can be registered by holding down the numeric button
more.
¡ To stop presetting stations, press
(DISP Display).
CQ-DFX983/903N
(P·SET Preset}) or
~ .
1 6
(P·SET Preset}) or (P·SET
(P·SET Preset{) for 2
Preset number
~ 2 sec. or
6
1