Using The Zoom - Sanyo Xacti VPC-S7EX Instruction Manual

USING THE ZOOM

Your camera has two zoom functions: optical zoom and digital zoom.
1
Set the camera to the shooting
mode (page 27), and point the
camera lens at the subject.
2
Press the zoom switch to
compose the desired image.
[T]: Zoom in on the subject.
[W]: Zoom out.
h When the zoom switch is
pressed, the zoom bar appears
on the monitor.
h When the optical zoom factor is
at maximum, zooming stops
temporarily. When [T] on the
zoom switch is pressed again,
the mode changes to the digital
zoom mode and zooming
continues.
3
Take the picture.
HINT
Can't access the digital zoom?
i The digital zoom cannot be used when the resolution is set to k, the
face chaser r scene function is active, or the focus mode is set to AF
seeker p.
Can't access the optical zoom?
i When the focus range is set to pan o or during video clip recording, the
optical zoom cannot be used.
51
English
Zoom switch [W]/[T]
Monitor
When both optical
and digital zoom
are enabled
Optical zoom
Digital zoom (yellow)
When optical zoom
only is enabled
When digital zoom
only is enabled
Zoom bar
Pointer