Sanyo Xacti VPC-S7EX Instruction Manual page 102

i If Card B already has image data in it when it replaces Card A, file names
are assigned as follows.
When the highest image number on Card B (before replacing) is
lower than the highest image number on Card A: the file name of the
next recorded image continues from last file name recorded on Card A.
Card A
Card B
Previously recorded images
When the highest image number on Card B (before replacing) is
higher than the highest image number on Card A: the file name of the
next recorded image continues from last file name recorded on Card B.
Card A
Card B
Previously recorded images
HINT
What about the internal memory?
i The file number reset function works the same for the internal memory.
0001, 0002 ......0012, 0013
Replace card
0001, 0002, 0014, 0015 ...... 0025, 0026
0001, 0002 ......0012, 0013
Replace card
0020, 0021, 0022, 0023 ...... 0025, 0026
96
English