Table of Contents
Advertisement
Base station settings
Restoring the handset default
settings
You can reset individual settings and
changes that you have made.
The following settings are not affected by
a reset
u
Registration to the base station
u
Date and time
u
Entries in the calendar
u
Entries in the directory, Quick list, Call
lists as well as the content of the
Resource Directory
Ï
¢
¢
v
Reset
Press the Display key.
§Yes§
Base station settings
The base station settings are carried out
using a registered Gigaset SL78H handset.
Protecting against unauthorized
access
Protect the system settings of the base sta-
tion with a PIN known only to you. The
system PIN must be entered when, for
example, registering/deregistering a
handset to/from the base station or when
restoring the default settings.
Changing the system PIN
You can change the 4-digit system PIN pre-
set on the base station (default setting:
0000) to a 4-digit PIN known only by you.
Setting a system PIN facilitates remote
operation of the answering machine
¢
(
page 39).
Ï
¢
¢
v
System
~
Enter the current system PIN
and press
~
Enter your new system PIN
and press
56
¢
Handset Reset
¢
System PIN
.
§OK§
.
§OK§
Returning to the default system PIN
If you have forgotten your system PIN, you
can reset the base station to the original
code 000.
Disconnect the power cord from the base
station. Hold down the Registration/Pag-
ing key on the base station while recon-
necting the power cable to the base sta-
tion. Release the key after a few seconds.
The base station has now been reset, and
the system PIN 0000 set.
Please note
All handsets are deregistered and must
be reregistered. All handsets are dereg-
istered and must be re-registered.
All factory settings are restored.
Activating/deactivating music
on hold
Ï
¢
¢
v
Audio Settings
¢
Music on Hold
Press
to activate or deactivate the
§Change§
music on hold (³ = on).
Restoring the base station to the
factory settings
When the settings are restored
u
Date and time will be retained
u
Eco mode is deactivated
u
Handsets are still registered
u
The system PIN is not reset
Ï
¢
¢
v
Reset
~
Enter the system PIN and
press
§OK§
Press the Display key.
§Yes§
¢
Base Reset
.
Advertisement
Table of Contents
