Corporation recognizes environmental protection as a key management tasks, and is doing its utmost to enhance and improve the quality and scope of its environmental activities. In line with this, Toshiba proactively promotes Green Procurement, and seeks to purchase and use products, parts and materials that have low environmental impacts.
Стр. 1 из 1 LEAD-FREE SOLDER This product is manufactured using lead-free solder as a part of a movement within the consumer products industry at large to be environmentally responsible. Lead-free solder must be used in the servicing and repair of this product. WARNING: This product is manufactured using lead free solder.
Through WEB, ver. 6.5 has been released but with it, the linking function in this manual may not work properly. If ver. 6.5 has been installed, uninstall it and reinstall ver. 6.0. To get ver. 6.0, click the icon, or contact to the nearest Toshiba Service Centre for further assistance. Freezing windows opened (Cannot close the open windows) This may happen occasionally.
Page 5
Стр. 2 из 2 Continue to use by operating the windows. Precaution when opening the diagrams While opening the diagrams, the menu in the left frame changes its color to GRAY. This is an indication that the viewer is processing. With this condition, the menu indication color may stick to the GRAY color or Windows may freeze if clicking other menu.
Page 6
Стр. 1 из 4 IMPORTANT NOTICE User Guide Autodesk® DWF™ Viewer is necessary to view drawings and to activate the functions of this system. Please download and install. When Windows XP SP2 is used, pop-up windows are limited by the enhanced security function and this sample may not work.
Page 7
Стр. 2 из 4 Operating Environment : Pentium III or higher recommended Monitor : 1024 x 768 or higher resolution recommended file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.735\37L... 11.05.2015...
Page 8
Стр. 3 из 4 Mouse : A mouse with wheel recommended : Microsoft Windows 2000/XP Browser Microsoft Internet Explorer 6.0 or later Drawing viewer : Autodesk DWF Viewer 6.0 * Use the software following respective license terms and conditions. Note: In case of using this service manual with network connection, allocate its folder to the client PCs as network drive to avoid any possible malfunction.
Page 9
Стр. 4 из 4 Layer Display Changing Function When any of the color buttons on the toolbar is clicked, it can be selected to display desired layer in its color or not to display each layer. This allows you to see the pattern layer only by setting other layers to "non-display".
Page 10
WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Toshiba shall not be liable for any damages, losses, expenses or costs, if any, incurred in connection with or as a result of use of any information or data provided herein.
ADJUSTMENT [LCD] USA Стр. 1 из 9 ADJUSTMENT Service Mode Entering to Service Mode 1. Set VOLUME to minimum and press MUTE button twice on Control. ↓ ↓ ↓ ↓ 2. Press MUTE button again and hold button down. ↓ ↓ ↓ ↓ Service Mode display 3.
Page 12
ADJUSTMENT [LCD] USA Стр. 2 из 9 Key Function in the Service Mode The following key entry during display of adjustment menu provides special functions. Selection of the adjustment items CH (on TV or remote control) Change of the data value Volume +/- (on TV or remote control) Adjustment menu mode ON/OFF MENU button (on remote control) Reset the count of operating...
Page 13
ADJUSTMENT [LCD] USA Стр. 3 из 9 (a) HOST-MICRO EEPROM data DRMA0487 (b) TV-MICRO EEPROM data DRMA0489 (2) Prior to changing any board containing an EEPROM IC, the exisiting data in each image format should be copied down as a precautionary measure. Note: (*1) DigitalCH (All format) (*2) PC or 1080I/720P ColorStream/HDMI...
Page 14
ADJUSTMENT [LCD] USA Стр. 4 из 9 77H : Movie 37 26 only all LX96 COLC COLOR CENTER C8H : Sports A0H : Standard 90H : Movie C0H : Sports (*1) 98H : Standard (*1) 88H : Movie (*1) B0H : Sports (*2) 98H : Standard (*2) 88H : Movie (*2) B8H : Sports...
Page 15
ADJUSTMENT [LCD] USA Стр. 5 из 9 00H : Standard (*4) 00H : Movie (*4) VBIS VBI Setting Closed Caption VBID 80H : ANT1/2 88H : Others Gemstar *BYBK B-Y OFF SET *RYBK R-Y OFF SET OPT1 TV SET OPTION 1 37 only all LX96 OPT2 TV SET OPTION 2...
Page 16
ADJUSTMENT [LCD] USA Стр. 6 из 9 TREC Treble center Data 26 only only EBAS Add Bass on FOCUS 37 26 only only ETRE Add Treble on FOCUS 37 26 only all LX96 WON2 Bass Reducer ALS point ALOF Reduce in ALL (wow, TruSurround) off VSTB Reduce Volume For Stable Sound...
Page 17
ADJUSTMENT [LCD] USA Стр. 7 из 9 Adjusting the Data Pressing of VOLUME button will change the value of data in the range from 00H to FFH. The variable range depends on the adjusting item. Exit from Service Mode Pressing POWER button to turn off the TV once. Self Diagnostic Function 1.
Page 18
ADJUSTMENT [LCD] USA Стр. 8 из 9 (1) Version information of TV-MICRO : Display 1 byte data. (2) Version information of TV-MICRO : Display 1 byte data. EEPROP (3) Version information of DVD MPU : HLV66, LX96 and HLV16 only (Not in used for HL66, HL196 and LX196) (4) Version information of DMD Engine : LCD Model not used.
Page 19
ADJUSTMENT [LCD] USA Стр. 9 из 9 indicate the TV's status, as described below: Note: If the TV loses A/C power (e.g., a power outage occurs or the power cord is unplugged), when power is restored, the yellow LED will blink while the TV is booting until the remote control is usable.
Page 20
Стр. 1 из 2 FUNCTION AND OPERATION TV Front and Side Panel Control and Connection file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.084\37L... 11.05.2015...
Page 21
Стр. 2 из 2 file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.084\37L... 11.05.2015...
Стр. 1 из 4 FUNCTION AND OPERATION Learning about the Remote Control file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.286\37L... 11.05.2015...
Page 23
Стр. 2 из 4 file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.286\37L... 11.05.2015...
Page 24
Стр. 3 из 4 file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.286\37L... 11.05.2015...
Page 25
Стр. 4 из 4 file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.286\37L... 11.05.2015...
Page 26
Стр. 1 из 4 FUNCTION AND OPERATION Programming Channel into the TV's Channel Memory Programming Channel Automatically file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.101\37L... 11.05.2015...
Page 27
Стр. 2 из 4 file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.101\37L... 11.05.2015...
Page 28
Стр. 3 из 4 Manually Adding and Deleting Channel in the Channel Memory file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.101\37L... 11.05.2015...
Page 29
Стр. 4 из 4 file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.101\37L... 11.05.2015...
Handling the LCD Module Стр. 1 из 4 SAFETY INSTRUCTION Handling the LCD Module Safety Precaution In the event that the screen is damaged or the liquid crystal (fluid) leaks, do not breathe in or drink this fluid. Also, never touch this fluid. Such actions could cause toxicity or skin irritation. If this fluid should enter the mouth, rinse the mouth thoroughly with water.
Page 31
Handling the LCD Module Стр. 2 из 4 3. If the panel surface becomes soiled, wipe with cotton or a soft cloth. If this does not remove the soiling, breathe on the surface and then wipe again. If the panel surface is extremely solied, use a CRT cleaner as a cleaner. Wipe off the panel surface by drop the cleaner on the cloth.
Page 32
Handling the LCD Module Стр. 3 из 4 6. CMOS-LSI circuitry is used in the LCD module, so avoid damage due to static electricity. When handling the module, use a wrist ground or anchor ground. 7. Do not expose the LCD module to direct sunlight or strong ultraviolet rays for an extended period of time.
Page 33
Handling the LCD Module Стр. 4 из 4 10. When transporting the LCD module, do not use packing containing epoxy resin (amine) or silicon resin (alcohol or oxim). The gas generated by these materials can cause loss of polarity. file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.919\37L... 11.05.2015...
SAFETY INSTRUCTION [LCD] USA Стр. 1 из 3 SAFETY INSTRUCTION WARNING: BEFORE SERVICING THIS CHASSIS, READ THE "SAFETY PRECAUTION" AND "PRODUCT SAFETY NOTICE" INSTRUCTIONS BELOW. Safety Precaution WARNING: SERVICING SHOULD NOT BE ATTEMPTED BY ANYONE UNFAMILIAR WITH THE NECESSARY PRECAUTIONS ON THIS RECEIVER. THE FOLLOWING ARE THE NECESSARY PRECAUTIONS TO BE OBSERVED BEFORE SERVICING THIS CHASSIS.
Page 35
SAFETY INSTRUCTION [LCD] USA Стр. 2 из 3 inflammability, voltage resistance, etc. therefore, use only replacement parts that have these same characteristics. Use only the specified parts when the mark is indicated in the circuit diagram or parts list. 7. Parts mounting and routing dressing of wirings should be the same as that used originally.
SAFETY INSTRUCTION [LCD] USA Стр. 3 из 3 limit constitutes a potential shock hazard and must be corrected immediately. Product Safety Notice Many electrical and mechanical parts in this chassis have special safety-related characteristics. These characteristics are often passed unnoticed by a visual inspection and the protection afforded by them cannot necessarily be obtained by using replacement components rated for higher voltage, wattage, etc.
Стр. 1 из 2 SCHEMATIC DIAGRAM Precaution WARNING: BEFORE SERVICING THIS CHASSIS, READ THE "X-RAY RADIATION PRECAUTION" FOR DIRECT VIEW CTV ONLY, "SAFETY PRECAUTION" AND "PRODUCT SAFETY NOTICE" OF THIS MANUAL. CAUTION: The international hazard symbols " " in the schematic diagram and the parts list designate components which have special characteristics important for safety and should be replaced only with types identical to those in the original circuit...
Page 61
Стр. 2 из 2 All capacitors are ceramic 50 V, unless otherwise noted as the following marks. = Electrolytic capacitor = Mylar capacitor 3. The parts indicated with " " have special characteristics, and should be replaced with identical parts only. 4.
Page 159
Accessory Стр. 1 из 1 Accessory Location Parts No. Description K902 75003640 REMOCON HAND UNIT, CT-90257 Y101 75002982 OWNERS MANUAL, INST REV1 Y102 75003421 OWNERS MANUAL, OPERATING E/F Y109 23945015 BAG, POLYETHYLENE COVER 250X400 Y170 23845800 HOLDER, WIRE, NYLON66 D6.8 file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.513\37L...
Page 160
Cabinet Стр. 1 из 1 Cabinet Location Parts No. Description A201 75003642 CESE/COVER/LID FRONT BEZEL ASSY A245 23717214 SCREW, BITTB3X12SBN A315 23533551 BACK COVER, CENTER A320 75003382 FRONT AV ASSY A340 75003645 KNOB CONTROL HOLDER ASSY A370 23717267 SCREW, BITTB4X16 SBN A380 23717214 SCREW, BITTB3X12SBN...
Page 161
Miscellaneous Стр. 1 из 1 Miscellaneous Location Parts No. Description B001 75003544 DISPLAY, T370XW01 V2 (B) B310 23717219 SCREW, PP3X8+SW+W SBN B311 23717214 SCREW, BITTB3X12SBN BD01 75002659 DVD PLAYER/RECORDER, RL-SL2003 (T1) CN61A 75002683 CONNECTOR, 1MM PITCH B TO B, 237702150K4 E104 23390004 EMI GASKET, SSTG0.5-4...
Page 162
Packing Стр. 1 из 1 Packing Location Parts No. Description A701A 75003646 CARTON TOP CASE A701B 23015194 CARTON BOX, BOTTOM A702A 23580052 PACKING, TOP A702B 23580053 PACKING, BOTTOM A703 23945216 BAG, LAMIFILM BAG A705 23518043 PACKING, JOINT A709 23946940 PACKING, CENTER PACKING file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.729\37L...
Стр. 1 из 2 PARTS LIST Precaution WARNING: BEFORE SERVICING THIS CHASSIS, READ THE "X-RAY RADIATION PRECAUTION" FOR DIRECT VIEW CTV ONLY, "SAFETY PRECAUTION" AND "PRODUCT SAFETY NOTICE" OF THIS MANUAL. CAUTION: The international hazard symbols " " in the schematic diagram and the parts list designate components which have special characteristics important for safety and should be replaced only with types identical to those in the original circuit...
Page 164
Стр. 2 из 2 : Electrolytic : Metal Film : Fusible Resistor All CD and PF capacitors are ±5 %, 50 V and all resistor, ±5 %, 1/6 W unless otherwise noted. file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.017\37L... 11.05.2015...
Page 165
U01 A/V (PE0141) Стр. 1 из 6 Loading ... Location Parts No. Description 75003633 A/V, B910PE0141A1 C401 76092730 CAPACITOR, CERAMIC CHIP, 16V B 0.1UF K C402 76092730 CAPACITOR, CERAMIC CHIP, 16V B 0.1UF K C403 76105181 CAPACITOR, CERAMIC CHIP, 50V CH 180PF J C601 76092730 CAPACITOR, CERAMIC CHIP, 16V B 0.1UF K...
Page 166
U01 A/V (PE0141) Стр. 2 из 6 C1810 76073150 CAPACITOR, ELECTROLYTIC, 16V 56UF M C1811 76619102 CAPACITOR, ELECTROLYTIC CHIP, 16V 47UF M C1812 76092616 CAPACITOR, CERAMIC CHIP, 16V B 0.33UF K C1815 76100104 CAPACITOR, CERAMIC CHIP, 25V F 0.1UF Z C1816 76100104 CAPACITOR, CERAMIC CHIP, 25V F 0.1UF Z...
Page 167
U01 A/V (PE0141) Стр. 3 из 6 CA46 76092883 CAPACITOR, CERAMIC CHIP, 50V B 0.1UF K CA200 76092883 CAPACITOR, CERAMIC CHIP, 50V B 0.1UF K CA201 76092883 CAPACITOR, CERAMIC CHIP, 50V B 0.1UF K CC01 76109102 CAPACITOR, CERAMIC CHIP, 50V B 1000PF K CC02 76109102 CAPACITOR, CERAMIC CHIP, 50V B 1000PF K...
Page 168
U01 A/V (PE0141) Стр. 4 из 6 CG06 76092883 CAPACITOR, CERAMIC CHIP, 50V B 0.1UF K CG07 76109333 CAPACITOR, CERAMIC CHIP, 25V B 0.033UF K CG08 76092795 CAPACITOR, CERAMIC CHIP, 6.3V B 2.2UF K CG09 76092784 CAPACITOR, CERAMIC CHIP, 10V B 0.33UF K CG10 76092883 CAPACITOR, CERAMIC CHIP, 50V B 0.1UF K...
Page 177
U02 FRONT AV (PE0141) Стр. 1 из 1 U02 FRONT AV (PE0141) Location Parts No. Description 75003634 PWU, FRONT AV, B910PE0141A2 CC11 76109102 CAPACITOR, CERAMIC CHIP, 50V B 1000PF K CC12 76109102 CAPACITOR, CERAMIC CHIP, 50V B 1000PF K CV122 76105101 CAPACITOR, CERAMIC CHIP, 50V CH 100PF J GR605...
Page 178
U03 LED/RMT (PE0141) Стр. 1 из 1 U03 LED/RMT (PE0141) Location Parts No. Description 75003635 PWU, LED/RMT, B910PE0141A3 CB01 76202221 CAPACITOR, ELECTROLYTIC, 10V 220UF M CB02 76202221 CAPACITOR, ELECTROLYTIC, 10V 220UF M CB03 76100104 CAPACITOR, CERAMIC CHIP, 25V F 0.1UF Z CB04 76100104 CAPACITOR, CERAMIC CHIP, 25V F 0.1UF Z...
Page 179
U03 LOWB (PE0143) Стр. 1 из 5 U03 LOWB (PE0143) Location Parts No. Description 75003639 LOWB, B910PE0143A1 CE03 76232103 CAPACITOR, CERAMIC DISC, 50V F 0.01UF Z CE04 76232103 CAPACITOR, CERAMIC DISC, 50V F 0.01UF Z CE06 76232103 CAPACITOR, CERAMIC DISC, 50V F 0.01UF Z CE10 76666470 CAPACITOR, ELECTORLYTIC, 16V 47UF M...
Page 191
U06 BANKAN (PE0141) Стр. 1 из 1 U06 BANKAN (PE0141) Location Parts No. Description 75003638 PWU, BANKAN, B910PE0141A6 PN701 75001960 CONNECTOR, 1MM PITCH B TO B, 137701150W3 PN711 23713816 SOCKET, 127301113K2 file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.762\37L... 11.05.2015...
Page 192
U201 POWER (PE0071) Стр. 1 из 7 Loading ... Parts Location Description U201 75003371 PC BOARD ASSY, PE0071G1, POWER C812 76109102 CAPACITOR, CERAMIC CHIP, 50V B 1000PF K C814 76109102 CAPACITOR, CERAMIC CHIP, 50V B 1000PF K C815 76073037 CAPACITOR, ELECTROLYTIC, 16V 47UF M C816 76109102 CAPACITOR, CERAMIC CHIP, 50V B 1000PF K C817...
Page 193
U201 POWER (PE0071) Стр. 2 из 7 C881 76092337 CAPACITOR, CERAMIC DISC, 2KV 220PF K C882 76539334 CAPACITOR, PLASTIC FILM, 50V 0.33UF J C883 76212221 CAPACITOR, CERAMIC DISC, 50V B 220PF K C884 76073196 CAPACITOR, ELECTROLYTIC, 50V 22UF M C885 76214471 CAPACITOR, CERAMIC DISC, 500V B 470PF K C886 76212152 CAPACITOR, CERAMIC DISC, 50V B 1500PF K...