Troubleshooting - Siemens HF 879 Series Operating Instructions Manual

Notes
Cleaning the door seal
surfaces
Cleaning the door seal
Cleaning the glass cover
on the oven ceiling

Troubleshooting

Problem
The oven does not work.
58
The oven is enamelled. Enamel must be burned in
at very high temperatures, which can cause slight
discoloration.
The thin edges of baking trays cannot be completely
coated with enamel, and may therefore be rough.
Protection against corrosion is guaranteed.
Always keep the surfaces of the door seal clean so
that the door closes properly.
The seal can be removed and washed in hot soapy
water (not in a dishwasher).
Unscrew the glass cover from the detent (see picture,
white arrow) and remove.
For slight dirt:
Wipe the glass cover with hot soapy water.
For intense dirt:
Clean the glass cover in the same manner as the
enamel surfaces within the oven.
When reinserting the cover, screw in until it engages
properly.
Malfunctions often have simple explanations. Please
read the following instructions before calling the
after sales service:
Possible cause
Blown fuse.
Not plugged in.
Power failure.
Comments/Remedy
Look in the fuse box and check that the
fuse is in working order.
Plug in the oven.
Check whether the kitchen light
switches on.