Selecting A Location You Searched For Recently; Searching For A Location By Coordinates - Pioneer AVIC-F220 Operation Manual

Chapter
06 Searching for and selecting a location
3 Touch [Home] on the map screen and
then touch [Navigation].
= For details of the operations, refer to Screen
switching overview on page 12.
4 Touch [FEEDS].
The "Select List" screen appears.
5 Touch the item you want.
The "Select POI" screen appears.
6 Touch the POI you want.
The searched location appears on the map
screen.
= For the subsequent operations, refer to Set-
ting a route to your destination on page
34.
Selecting a location you
searched for recently
The places that you have set as destination or
waypoint in the past are automatically stored
in "History".
p The location is also stored when you touch
[Scroll] in the location confirmation screen.
p If no location is stored in Destination His-
tory, you cannot select [History]. (If you
perform a route calculation, you can select
[History].)
p "History" can store up to 100 locations. If
the entries reach the maximum, the new
entry overwrites the oldest one.
1 Touch [Home] on the map screen and
then touch [Navigation].
= For details of the operations, refer to Screen
switching overview on page 12.
2 Touch [History].
The "Destination History" screen appears.
32
Engb
3 Touch the entry you want.
The searched location appears on the map
screen.
= For the subsequent operations, refer to Set-
ting a route to your destination on page
34.
Searching for a location by
coordinates
Entering a latitude and longitude pinpoints
the location.
1 Touch [Home] on the map screen and
then touch [Navigation].
= For details of the operations, refer to Screen
switching overview on page 12.
2 Touch [Coordinate].
The "Coordinate Input Menu" screen ap-
pears.
3 Touch [Longitude].
The "Enter Longitude" screen appears.